We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with 22-pin SATA and 29-pin SAS connectors

Vszerda

Vszerda SATA to SAS HDD Adapter 6Gbps SATA 3.0 22Pin to 29Pin 2.5/3.5 Inch

SKU CH-KX8P-V9XEH

Converts a 22-pin SATA 3.0 connection to a 29-pin SAS interface for 2.5 or 3.5 inch drives at 6Gbps

  • Connect SAS drives to SATA controllers via 22-pin to 29-pin conversion
  • Supports 6 Gbps SATA 3.0 bandwidth for high-speed data transfer
  • Compatible with 2.5 inch and 3.5 inch SAS hard disks and SSDs
  • Enables SAS storage expansion on motherboards with native SATA ports

SATA-to-SAS adapter for 2.5 and 3.5 inch drives

This adapter connects a standard SATA 3.0 host port to a SAS hard disk or SSD. It accepts both 2.5 inch and 3.5 inch drives that use the 29-pin SAS connector. The card provides a direct electrical path without active signal conversion. It is intended for builders adding SAS storage to a SATA-only controller or motherboard.

6 Gbps link with SATA-device headroom

The interface runs at up to 6 Gbps, matching the SATA 3.0 specification. A SAS drive connected through this adapter will operate at SATA speeds, so the drive’s own SAS bandwidth headroom goes unused. The adapter cannot support SAS-specific features such as dual-port operation or wide-port aggregation. Buyers who need full SAS protocol performance should use a native SAS HBA instead.

Highlights

  • Connect SAS drives to SATA controllers via 22-pin to 29-pin conversion
  • Supports 6 Gbps SATA 3.0 bandwidth for high-speed data transfer
  • Compatible with 2.5 inch and 3.5 inch SAS hard disks and SSDs
  • Enables SAS storage expansion on motherboards with native SATA ports

Specifications

No published specifications for this item yet.

Questions about this item

Will the 22-pin SATA connector on this adapter work with my existing SATA 3.0 motherboard ports?

Yes, the 22-pin SATA interface is designed for SATA 3.0 connectivity, matching standard motherboard ports for 2.5 or 3.5 inch drives.

How can I verify the adapter is running at 6Gbps after connecting a SAS drive?

Check the negotiated link speed in your BIOS or operating system drive information; it should report 6Gbps for a SAS 2.5 or 3.5 inch SSD or HDD.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.