We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with SATA and SFF-8482 connectors

Vszerda

Vszerda SATA to SAS Adapter 2.5/3.5" SFF-8482

SKU CH-ZBB8-3W0PM

Connects SFF-8482 SAS hard disks to a standard SATA motherboard port without a RAID card

  • Use SAS drives on standard SATA motherboards without a RAID card
  • Built-in conversion chip enables direct read/write of SFF-8482 disks
  • Compatible with Windows 10, Windows 11 and Linux operating systems
  • Designed for 2.5 and 3.5 inch SFF-8482 SAS hard disks only
  • SMART data may be limited but normal read/write is unaffected

SATA-to-SAS adapter with SFF-8482 connector

This adapter bridges SFF-8482 SAS hard disks to a standard motherboard SATA port using a built-in conversion chip. It removes the need for a dedicated SAS RAID card so desktop systems can read and write enterprise drives directly. The board fits 2.5 and 3.5 inch drive form factors and works with Windows 7, 10, 11 and Linux.

Suits owners of SFF-8482 SAS drives needing SATA

Builders who have SFF-8639 U.2 drives cannot use this adapter because the pinout is incompatible. Users who plan to connect the converted drive through a USB enclosure or cable should avoid this part as the USB bridge chipset often causes incompatibility. Systems without any SATA port also cannot benefit from the converter.

SFF-8482 interface compatibility is the deciding

Only SFF-8482 SAS hard disks are supported; SFF-8639 U.2 disks are explicitly not supported. The adapter presents the SAS drive to the operating system over a native SATA link, though SMART data may appear incomplete after conversion. No SAS controller or RAID card is required for basic read and write operation.

Highlights

  • Use SAS drives on standard SATA motherboards without a RAID card
  • Built-in conversion chip enables direct read/write of SFF-8482 disks
  • Compatible with Windows 10, Windows 11 and Linux operating systems
  • Designed for 2.5 and 3.5 inch SFF-8482 SAS hard disks only
  • SMART data may be limited but normal read/write is unaffected

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter fit both 2.5 and 3.5 inch SFF-8482 SAS drives?

Yes, the adapter supports SFF-8482 SAS hard disks in both 2.5 and 3.5 inch form factors.

What is the correct way to install the adapter without causing drive detection issues?

Connect the adapter directly to a motherboard SATA port; do not use a USB enclosure or cable because the USB chipset is not adapted and incompatibility may occur.

Will I need to replace the adapter if SMART data stops appearing for the SAS drive?

No, incomplete or missing SMART information after conversion is normal and does not affect normal reading and writing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.