We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SATA to M.2 NGFF adapter board 11.2x4.5cm

Vszerda

Vszerda SATA to M.2 NGFF Adapter Blue 11.2x4.5cm

SKU CH-TKWE-7HXFE

Converts a SATA M.2 NGFF SSD to a standard SATA connection using a blue 11.2 x 4.5 cm adapter board with included mounting hardware

  • Converts M.2 NGFF SSDs to SATA for easy upgrades
  • Includes filter capacitors and LDO regulator for stable power delivery
  • Compact 11.2 x 4.5 cm blue board fits tight spaces
  • Silent solid-state operation with no moving parts to fail
  • Shock-resistant design suits harsh or mobile environments

What the adapter does

The Vszerda SATA to M.2 NGFF adapter lets you install a SATA-based M.2 NGFF SSD into a standard 2.5-inch SATA drive bay. It carries the SATA signal through a compact blue PCB and includes the mounting screws and nuts needed for a secure fit. The board measures 11.2 by 4.5 cm and uses on-board filter capacitors with an LDO regulator chip to keep power delivery steady. No extra drivers or software are required.

Who should buy it and who should not

This adapter suits anyone upgrading a laptop or desktop that only offers a SATA connection but wants to use an M.2 NGFF SATA SSD. It is not for builders who need to connect a PCIe-based M.2 drive, nor for systems that lack a free SATA port or 2.5-inch mounting space. The kit includes two screws and four nuts, so no separate hardware is necessary.

The specification that decides fit

The adapter only works with M.2 NGFF SSDs that use the SATA protocol; it will not pass PCIe lanes to the drive. The board provides a SATA data and power interface, on-board filter capacitors and an LDO regulator chip for stable operation. Physical size is 11.2 x 4.5 cm, so check your chassis clearance before ordering.

Highlights

  • Converts M.2 NGFF SSDs to SATA for easy upgrades
  • Includes filter capacitors and LDO regulator for stable power delivery
  • Compact 11.2 x 4.5 cm blue board fits tight spaces
  • Silent solid-state operation with no moving parts to fail
  • Shock-resistant design suits harsh or mobile environments

Specifications

No published specifications for this item yet.

Questions about this item

What SATA port and M.2 NGFF SSD must I already have for this adapter to work?

You need a free SATA data and power port on the host and an M.2 NGFF SSD that uses the SATA protocol.

Will my existing SATA III controller run this adapter at full speed?

Yes, the adapter passes the SATA III signal through without conversion, so the host controller sets the speed limit.

How can I verify the adapter is working after I install the SSD?

The SSD should appear in BIOS and the operating system disk utility at its rated capacity with no errors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.