We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black adapter board with 2.5 inch SATA female and 3.5 inch 40 pin IDE male connectors

Vszerda

Vszerda SATA to IDE Adapter 2.5" to 3.5" 40 PIN 1.5Gbs ATA 133 100

SKU CH-PZKH-95TP5

Connects a 2.5 inch SATA drive to a 3.5 inch 40-pin IDE interface at 1.5 Gbps with ATA 133/100 support

  • Connect 2.5" SATA drives to 3.5" IDE ports
  • 40-pin male connector fits legacy motherboards and enclosures
  • 5 Gbps transfer rate for ATA 133 and ATA 100 compatibility
  • Supports HDD, CD and DVD devices without extra drivers

SATA to IDE adapter for 2.5" drives

This adapter connects a 2.5" SATA drive to a 3.5" 40-pin IDE interface. It supports ATA 133 and 100 modes with a 1.5 Gbps transfer rate. The converter suits users adding older IDE systems or optical drives.

Passive design with no external power

The unit draws power directly from the IDE bus and has no active cooling. Operation is silent and adds negligible load to the host supply. It is not suited for builders needing hot-swap capability or RAID configurations.

Highlights

  • Connect 2.5" SATA drives to 3.5" IDE ports
  • 40-pin male connector fits legacy motherboards and enclosures
  • 5 Gbps transfer rate for ATA 133 and ATA 100 compatibility
  • Supports HDD, CD and DVD devices without extra drivers

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda adapter with a 2.5 inch SATA drive and a 3.5 inch IDE cable?

Connect the 2.5 inch SATA drive to the adapter's female SATA port, then plug the adapter's 40 pin male IDE connector into the 3.5 inch IDE cable, ensuring the pin 1 alignment matches the cable's red stripe.

What maintenance will the 40 pin IDE connector need over time?

The 40 pin IDE connector requires no scheduled maintenance; if pins become bent or oxidised, replace the adapter to maintain reliable ATA 133 100 operation at 1.5 Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.