We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided cables each splitting one SATA plug into five fan headers

Vszerda

Vszerda SATA to 5×3/4-pin fan splitter 27 cm 2-pack

SKU CH-7HNN-K4CE6

Splits one SATA power connector into five 3-pin or 4-pin fan headers to run up to five 12 V case fans from a single PSU cable

  • TypeSATA
  • Connector DetailSata to 3pin 4 Pin
  • Terminal GenderMale
  • FeaturesBraided
  • Powers five fans from one SATA connector
  • Braided nylon sleeve protects the 27 cm cable
  • Galvanised copper conductors rated for 12 V operation
  • Two splitters included for dual-fan configurations
  • Standard 24 AWG 1007 wire handles 12 V current

Power source for multiple fans

This pack contains two adapter cables that convert a single 15-pin SATA power connector into five 3-pin or 4-pin fan headers. Each 27 cm braided cable lets you run up to five 12 V case fans from one power supply connection. The 24 AWG copper conductors and nylon sleeving provide durable power delivery inside the chassis.

Builders needing simple fan expansion

The splitter suits anyone adding several chassis fans when motherboard headers are full or current-limited. It does not suit builders who require PWM speed control or voltage regulation for their fans. Buyers needing fan speed management should look at a powered hub or controller instead. The fixed 12 V output means every connected fan runs at full speed.

Fixed 12 V output with no speed control

The single specification that decides fit is the inability to control fan speed. The cable delivers constant 12 V power to all five headers without PWM or voltage adjustment. If your build requires quiet operation or thermal curves, this adapter will not meet that need. For basic maximum airflow it works reliably.

Highlights

  • Powers five fans from one SATA connector
  • Braided nylon sleeve protects the 27 cm cable
  • Galvanised copper conductors rated for 12 V operation
  • Two splitters included for dual-fan configurations
  • Standard 24 AWG 1007 wire handles 12 V current

Specifications

BrandYARCHONN
TypeSATA
Connector DetailSata to 3pin 4 Pin
Terminal GenderMale
FeaturesBraided

Questions about this item

Does the 12 V SATA splitter get hot or noisy when powering five fans continuously?

The adapter is a passive cable with no active electronics, so it produces no noise and negligible heat; the 24 AWG copper conductors handle the combined fan current without measurable temperature rise.

What must my power supply provide for this 15-pin SATA male connector to work?

A standard SATA power lead from the PSU is required; the splitter draws 12 V directly from that connector to feed up to five 3-pin or 4-pin fans.

Will my older 3-pin chassis fans run at full speed on this splitter?

Yes, the cable supplies constant 12 V to both 3-pin and 4-pin fans, but it cannot regulate or report speed, so 3-pin fans will spin at their maximum rated RPM.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.