We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black sleeved cables each with a SATA plug splitting to four fan headers

Vszerda

Vszerda SATA to 4× 3/4-Pin Fan Cable 11" 5-Pack

SKU CH-M94C-SJWPG

Connects up to four 3-pin or 4-pin PWM fans to a single 15-pin SATA power connector with 11-inch black-sleeved cables in a five-pack

  • Powers up to four PWM fans from one SATA connector
  • High-density black sleeving hides wires for a clean build
  • 15-pin male SATA input draws 12 V from standard drive power
  • Four 3/4-pin male outputs accept both 3-pin and 4-pin fans
  • 11-inch cable length with 27 cm reach suits compact cases

Five-Cable Pack for Fan Expansion

This pack contains five adapters that let you run up to four case fans from a single SATA power connector. Each cable accepts both 3-pin and 4-pin PWM fans so you can mix voltage and speed-control types. Builders who need many fans but have few motherboard headers will find this useful.

Passive Delivery at 12 V

The adapters draw 12 V directly from the power supply through a 15-pin SATA plug and pass it to four fan connectors without active circuitry. There is no fan controller or temperature sensor on the cable itself. Noise and thermals therefore depend entirely on the fans you attach and the curve set in BIOS or software.

SATA-Powered Daisy Chain

Each 27 cm cable adds four fan ports while consuming only one SATA lead from the PSU. This frees motherboard headers for CPU or pump connections and keeps wiring tidy with black sleeving. Builds that lack spare SATA power plugs or need longer reaches will need a different solution.

Highlights

  • Powers up to four PWM fans from one SATA connector
  • High-density black sleeving hides wires for a clean build
  • 15-pin male SATA input draws 12 V from standard drive power
  • Four 3/4-pin male outputs accept both 3-pin and 4-pin fans
  • 11-inch cable length with 27 cm reach suits compact cases

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda SATA fan cable, and what step is commonly missed?

Plug the 15-pin SATA connector into a free power-supply SATA port, then attach up to four 3-pin or 4-pin fans to the four output headers; the step often missed is ensuring each fan header clicks fully onto its pins so the PWM or voltage signal makes contact.

What maintenance or replacement will the Vszerda SATA fan cable need later?

The cable itself has no moving parts, so no scheduled maintenance is required; replace a unit only if the black sleeving frays, a connector pin bends, or a fan stops spinning due to a loose crimp.

What limit appears first when the Vszerda SATA fan cable runs four fans continuously at 12V?

The shared SATA power connector is rated for 12V delivery, so the practical limit is the total current draw of all four fans combined — if their combined amperage exceeds what the single SATA lead can supply, voltage will sag and fans will slow or stop.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.