We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda SATA to 3 Fan Splitter 16 inches Braided

SKU CH-PFSS-373D1

Powers three 3-pin or 4-pin case fans from a single SATA 15-pin connector using a 16-inch braided cable

  • TypeSATA
  • ColorBlack
  • Length16
  • Connector DetailDisplayPort
  • Terminal GenderMale-to-Female
  • ConductorCopper
  • Powers three case fans from one SATA connector
  • 16-inch braided cable reaches across full-size cases
  • 15-pin SATA male input plugs straight into PSU
  • Three 3/4-pin fan headers run at constant 12 V
  • Black braided sleeve protects wires and reduces clutter

Power three fans from one SATA connector

This adapter converts a single 15-pin SATA power connector into three 3-pin or 4-pin fan headers. It lets you run multiple case fans from one power supply output at a constant 12 V speed. The 16-inch braided cable keeps routing tidy inside the chassis.

Fans receive constant 12 V without PWM control

Each output header delivers 12 V on two active pins, so connected fans spin at full speed continuously. Motherboard fan-curve software cannot regulate these fans because the adapter does not pass a PWM signal back to the board. Builders needing variable speed must plug fans directly into motherboard headers instead.

Simple plug-in install with one routing caveat

Connect the SATA male end to any free power supply lead and attach up to three fans to the female headers. The only common issue is cable reach: the 16-inch length may fall short in full-tower cases where the power supply sits far from the top fan mounts. Measure your routing path before ordering.

Highlights

  • Powers three case fans from one SATA connector
  • 16-inch braided cable reaches across full-size cases
  • 15-pin SATA male input plugs straight into PSU
  • Three 3/4-pin fan headers run at constant 12 V
  • Black braided sleeve protects wires and reduces clutter

Specifications

BrandTeamProfitcom
Model8541689798
TypeSATA
ColorBlack
Length16
Connector DetailDisplayPort
Terminal GenderMale-to-Female
ConductorCopper
FeaturesBraided

Questions about this item

Should I pick the 16-inch cable or a longer version for my case?

The cable is supplied in a single 16-inch length; measure the distance from your SATA power connector to the furthest fan header to confirm it reaches.

What does the 12V rating mean for my fans once installed?

All three fan connectors deliver a fixed 12V from the SATA rail, so every attached fan runs at its maximum constant speed.

Does the SATA 15-pin input limit the total power I can draw for three fans?

The splitter draws all power through one SATA 15-pin connector, so the combined current of the three fans cannot exceed what that single connector can supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.