We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black sleeved SATA-to-triple-fan adapter cables, 27 cm each

Vszerda

Vszerda SATA to 3×3/4-pin PWM fan adapter splitter, 2-pack, 27 cm

SKU CH-5HBA-N9VD4

Two adapters split one 15-pin SATA power connector into three 3-pin or 4-pin PWM fan headers using 27 cm black-sleeved 24AWG cable

  • Powers three fans from one SATA 15-pin connector
  • PWM speed control works on one 4-pin fan
  • 3-pin fans run at fixed 12 V voltage
  • 24 AWG tinned copper with black sleeving
  • 27 cm cable fits tight chassis builds

SATA 15-pin to triple fan hub

Each adapter converts one SATA 15-pin power connector into three 3-pin or 4-pin fan headers, letting a power supply drive up to three chassis fans directly. The 24 AWG tinned-copper cable is black-sleeved and 27 cm long, and the pack contains two identical splitters.

Replaces motherboard fan headers

When a board lacks enough 4-pin headers, these splitters move the current draw to the PSU and preserve PWM control for one connected fan. The upgrade is worthwhile whenever the motherboard cannot supply sufficient amperage for all installed fans or when only a single PWM header is available.

Build integration notes

One SATA power lead per splitter is required, so ensure the PSU has spare connectors. Only one 4-pin fan per adapter reports speed and responds to PWM; additional 4-pin fans run at full 12 V, while 3-pin fans always run at fixed voltage.

Highlights

  • Powers three fans from one SATA 15-pin connector
  • PWM speed control works on one 4-pin fan
  • 3-pin fans run at fixed 12 V voltage
  • 24 AWG tinned copper with black sleeving
  • 27 cm cable fits tight chassis builds

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance do I need for the 27 cm sleeved cable and three fan connectors?

The black sleeved cable is approximately 27 cm long with three 3/4-pin male fan connectors on the output end.

Which fan header should I plug the PWM fan into for speed control?

Only one 4-pin fan receives PWM speed regulation; the motherboard reads speed from that single header while the other two run at fixed 12 V.

Will the SATA power connector or 24 AWG wires need replacement over time?

The adapter uses a 15-pin SATA male connector and 24 AWG tinned copper conductors; no user-serviceable parts are inside, so replacement is only needed if the cable is physically damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.