We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular circuit board with four toggle switches, LED lights, SATA power connectors, and a metal PCI bracket

Vszerda

Vszerda SATA Power Switch Module 2.5/3.5 inch HDD/SSD Selector 4-Channel

SKU CH-TE0E-F8W8V

Controls power independently for up to four 2.5 or 3.5 inch SATA drives with LED status indicators and includes cables

  • Independent 4-channel power switching extends drive life
  • LED indicators show each drive's working status at a glance
  • Manage HDDs, SSDs, optical drives, fans and RGB devices
  • Two-foot power cables reach across virtually any ATX case
  • Mounts in a PCIe x1 slot with included full-profile bracket

Four-channel SATA power selector

This module lets you switch the power of up to four internal SATA hard drives or solid-state drives independently from a single PCIe x1 mounting bracket. It is intended for builders who want manual control over each drive without opening the case.

Mechanical switches with status LEDs

Each channel has a physical toggle and a working-status LED so you can confirm drive activity at a glance. The unit includes four two-foot SATA power cables and a full-profile slot cover for rear-panel mounting in ATX chassis.

Check for a free PCIe x1 slot and drive power needs

Verify that your motherboard has an unused PCIe x1 slot for the bracket and that your drives use standard SATA power connectors. The module does not draw power from the slot and cannot control devices that require a different power interface.

Highlights

  • Independent 4-channel power switching extends drive life
  • LED indicators show each drive's working status at a glance
  • Manage HDDs, SSDs, optical drives, fans and RGB devices
  • Two-foot power cables reach across virtually any ATX case
  • Mounts in a PCIe x1 slot with included full-profile bracket

Specifications

No published specifications for this item yet.

Questions about this item

How does the SATA power switch control each drive and what is the practical limit?

The module provides independent mechanical switches for four channels, letting you cut power to each 2.5 or 3.5 inch drive individually while the system stays on.

What physical space and mounting hardware does the selector need inside the case?

It occupies one full-profile PCIe x1 slot at the rear of an ATX chassis; the bracket screws in place and the four two-foot power cables reach most drive bays.

What is the correct installation sequence so the drive LEDs and switches work?

Mount the bracket, connect the four SATA power cables from your PSU to the module, then attach each drive to the module outputs; the LED indicators light only when a drive is powered.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.