We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three flat blue SATA cables with locking latches, 15.75 inch length

Vszerda

Vszerda SATA III cable 3-pack 6 Gbps 15.75 in blue

SKU CH-KN35-YTPWA

Three SATA III cables with locking latches connect drives at up to 6 Gbps over 15.75 in lengths

  • ColorBlue
  • Up to 6 Gbps transfer with SATA revision 3.0
  • Locking latch on each end secures the connection
  • Three cables included for spare or RAID use
  • 75 in length fits standard internal drive bays
  • Blue colour helps identify cables inside the case

Vszerda SATA III cable 3-pack 6 Gbps

This set contains three straight SATA III cables, each 15.75 inches long, with blue jackets and locking latches on both ends. They link motherboards or host controllers to internal Serial ATA hard drives, SSDs or optical drives for data transfer only. The cables do not supply power, so each drive still needs its own power connection. Builders adding or replacing SATA storage will find the trio convenient for multiple bays or RAID arrays.

Locking latches and triple pack value

Every cable has a locking latch at each connector to prevent accidental disconnection during vibration or cable routing. The three-pack format lets you equip several drives at once or keep spares for future upgrades without ordering single cables repeatedly. Data rates reach the SATA 3.0 ceiling of 6 Gbps, though actual speed depends on the drive and controller capabilities. The cables are backward compatible with SATA I and SATA II ports.

Check SATA ports and drive power before ordering

Verify that your motherboard or controller has enough free SATA data ports for the drives you intend to connect. Confirm each target drive will receive power from the PSU, because these cables carry data only. Ensure the 15.75 inch length suits your case layout and drive placement; longer runs may need a different cable. This product is not for external eSATA connections or for drives that require a combined data-and-power connector.

Highlights

  • Up to 6 Gbps transfer with SATA revision 3.0
  • Locking latch on each end secures the connection
  • Three cables included for spare or RAID use
  • 75 in length fits standard internal drive bays
  • Blue colour helps identify cables inside the case

Specifications

ColorBlue

Questions about this item

Will the locking latches on these SATA III cables wear out after repeated drive swaps?

The latches are moulded into each connector and rated for the normal insert-and-remove cycles of a desktop build; they do not require scheduled replacement.

What caps the real-world throughput when I run long sequential transfers with these 6 Gbps cables?

The attached drive and host controller set the ceiling; the cable itself supports up to 6 Gbps under SATA Revision 3.0.

Do the cables get warm or draw extra power during all-day RAID rebuilds?

They carry only data and draw negligible current, so they stay at case temperature and add no measurable heat or noise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.