Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Vszerda
Four 1 metre SATA III cables with straight-to-90-degree connectors support 6 Gbps transfers and include locking latches for secure data links
This pack contains four SATA data cables, each 3.3 feet long. Every cable has a straight connector on one end and a 90-degree right-angle connector on the other. The nylon-braided sleeve bundles the four leads together for tidier routing inside a case. No power conductors are included; drives must be powered separately.
Each cable supports the SATA III standard with a maximum data rate of 6 Gbps. The 30 AWG conductors are rated for 12 Gbps SAS signalling, so the link runs at the speed of the attached drive and controller. Backward compatibility with SATA I and SATA II devices is maintained. A locking latch on each connector secures the connection against vibration.
Builders adding multiple 2.5 or 3.5 drives to a motherboard or RAID controller will appreciate the labelled P1–P4 ends and the mixed straight-to-right-angle geometry for tight spaces. The set is not for anyone needing a single cable, a different length, or a straight-to-straight or right-angle-to-right-angle orientation. It also cannot supply drive power.
| Brand | ADCAUDX |
|---|---|
| Model | SATA-011 |
| Type | SATA Cables |
| Color | Black/Blue |
| Length | 3.3 |
| Speed | 6 gigabytes_per_second |
| Conductor | nylon |
| Features | Data Transfer |
The 6 Gbps rating is the maximum interface speed; actual throughput depends on the drive and controller you connect, and the cable is backward compatible with SATA I and II devices.
It meets the SATA III specification, supporting up to 6 Gbps data rates while remaining compatible with older SATA I and II drives.
The right-angle plug is designed for tight spaces such as server chassis or stacked drives; each cable is 3.3 ft long and uses a thin 30 AWG nylon-braided jacket for easier routing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?