We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four blue and black braided SATA cables with straight connectors, one metre each

Vszerda

Vszerda SATA-III Cable 1M 4-Pack 6Gbps Blue/Black

SKU CH-HF2Q-YYNTJ

Four 1-metre SATA III data cables with straight locking connectors and nylon-braided sleeving support 6 Gbps transfers and RAID labelling

  • ColorBlue/Black
  • SATA 3.0 spec supports up to 6Gbps transfers
  • Backwards compatible with SATA I and II drives
  • 1 metre length reaches drives across full-size cases
  • Nylon-braided sleeve bundles four cables for tidy routing
  • Locking latch on each 7-pin connector secures the link

What this cable set does

This four-pack of SATA III data cables connects internal hard drives, SSDs, optical drives and RAID controllers to motherboards or host controllers. Each cable carries data only and does not supply power, so drives must be powered separately. The straight 7-pin connectors feature locking latches for a secure fit in servers, workstations or mining rigs.

Signal quality and build

The cables use 30 AWG conductors wrapped in a 12G high-speed SAS thin cable and a nylon braided sleeve that bundles the four runs together for tidier routing. They meet the SATA 3.0 specification and support up to 6Gbps transfer rates, with actual speed limited by the attached equipment. Backward compatibility with SATA I and SATA II devices is maintained.

The deciding spec

Each cable is 1 metre (3.3 ft) long and terminated with straight 7-pin female connectors on both ends, labelled P1 to P4 for easy identification in multi-drive or RAID setups. Buyers who need right-angle connectors, a different length or a combined data-and-power cable will need a different product.

Highlights

  • SATA 3.0 spec supports up to 6Gbps transfers
  • Backwards compatible with SATA I and II drives
  • 1 metre length reaches drives across full-size cases
  • Nylon-braided sleeve bundles four cables for tidy routing
  • Locking latch on each 7-pin connector secures the link

Specifications

BrandADCAUDX
ModelSATA-005
ColorBlue/Black

Questions about this item

How do I route the four 1 metre SATA III cables inside a tight server case?

Each cable is labelled P1 to P4 and the nylon braid bundles all four together, so you can follow the labels to the correct SATA ports without tangling the 30 AWG wires.

What part of the cable wears out first when drives are swapped repeatedly?

The 7‑pin female connectors have a locking latch; the latch spring is the component most likely to fatigue after many insert‑remove cycles.

At what transfer rate will the cable stop scaling during a sustained RAID rebuild?

The cable meets the SATA 3.0 specification, so the 6 Gbps ceiling is the first hard limit you will hit under continuous heavy I/O.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.