We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black-and-blue nylon-braided SATA cables, straight-to-right-angle connectors, 0.5 m each

Vszerda

Vszerda SATA-III Cable 0.5M 4-Pack Right-Angle 6Gbps

SKU CH-CECB-HWHW1

Four right-angle SATA cables at .5 m each, rated for 6 Gbps data transfer with locking latches for secure connections

  • TypeSATA Cables
  • ColorBlack/Blue
  • Length1.6
  • Speed6 gigabits_per_second
  • Conductornylon
  • 6 Gbps transfer speed for faster storage upgrades
  • 5 m right-angle connectors fit tight server bays
  • Nylon-braided 30 AWG cables simplify four-drive cable routing
  • Locking SATA 7-pin latches keep data links secure
  • Backwards compatible with SATA I and SATA II drives

Four-cable SATA III kit

This pack contains four SATA 7-pin data cables, each 0.5 metres long, built with 30 AWG conductors and a nylon braid. The straight-to-90-degree angled connectors feature locking latches for secure attachment. They connect motherboards or host controllers to internal SSDs, HDDs, optical drives or RAID controllers. No power delivery is included; drives must be powered separately.

Suits tight server or RAID builds

The short length and right-angle design keep routing tidy in compact chassis or multi-drive arrays where space is limited. Labels on each cable simplify port identification during RAID setup. Builders needing longer runs for full-tower cases or external enclosures should look at something else. Users requiring combined data-and-power cables will also need a different product.

Handles 6 Gbps SATA III speeds

Each cable supports the SATA III specification up to 6 Gbps and remains backward compatible with SATA I and II drives. The 12 Gbps-rated SAS-grade conductors provide signal headroom for current mechanical drives and SATA SSDs. The practical throughput ceiling is set by the attached controller and drive, not the cable itself.

Highlights

  • 6 Gbps transfer speed for faster storage upgrades
  • 5 m right-angle connectors fit tight server bays
  • Nylon-braided 30 AWG cables simplify four-drive cable routing
  • Locking SATA 7-pin latches keep data links secure
  • Backwards compatible with SATA I and SATA II drives

Specifications

BrandADCAUDX
ModelSATA-011
TypeSATA Cables
ColorBlack/Blue
Length1.6
Speed6 gigabits_per_second
Conductornylon

Questions about this item

What motherboard port is required for these cables to work?

A standard SATA 7-pin data port on the motherboard or host controller is required for each cable.

Will these cables work with older SATA I or SATA II drives I already have?

Yes, they are backwards compatible with SATA I and SATA II drives while supporting up to 6 Gbps transfer rates.

How can I verify the cables are running at the rated 6 Gbps speed after installation?

Check the negotiated link speed in your BIOS or operating system storage utility; it should report 6 Gbps when connected to a SATA III device and port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.