We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three red SATA III cables with locking latches, 15.75 inches long

Vszerda

Vszerda SATA III 3-pack 15.75 in red locking latch cables

SKU CH-7B00-JDK1B

Three red SATA III cables, each 15.75 inches long with locking latches, support 6 Gbps data transfer for drives and optical devices

  • ColorRed
  • 6 Gbps peak transfer with SATA revision 3.0
  • Locking latches on both ends keep connections secure
  • Three cables in one pack for RAID or spares
  • 75 inch length suits standard drive bays
  • Red colour helps identify cables inside the case

Three-pack SATA III cables with locking latches

This three-pack of SATA III cables connects motherboards or host controllers to internal hard drives, SSDs and optical drives. Each cable measures 15.75 in and supports the SATA 3.0 specification for up to 6 Gbps data transfer. The set is suited to builders adding multiple drives or configuring RAID arrays.

Locking latches and straight connectors simplify

Locking latches on both ends click into place to prevent accidental disconnection during drive swaps or case moves. Straight connectors fit most motherboard headers and drive ports without sharp bends. The cables carry data only; a separate SATA power lead from the PSU is required for every drive.

Check port orientation

Verify that your motherboard or controller has enough free SATA ports for the drives you plan to add. Ensure each target drive has a matching SATA data connector and that the power supply provides sufficient SATA power connectors. The red colour helps cable management but does not affect compatibility.

Highlights

  • 6 Gbps peak transfer with SATA revision 3.0
  • Locking latches on both ends keep connections secure
  • Three cables in one pack for RAID or spares
  • 75 inch length suits standard drive bays
  • Red colour helps identify cables inside the case

Specifications

ColorRed

Questions about this item

How can I confirm the 6 Gbps SATA III link is active after installing the red locking cables?

Check the motherboard BIOS or OS device manager for a SATA 3.0 link speed on each connected drive.

What comes in the 3-pack and do I need separate power cables?

Three 15.75 inch red SATA data cables with locking latches; power cables are not included and must be sourced from the PSU.

Which cable length should I choose for a standard ATX case?

The 15.75 inch length suits typical motherboard-to-drive runs in ATX builds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.