We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter with SATA and IDE ports, USB 3.0 connector, backup button and blue LED indicators

Vszerda

Vszerda SATA/IDE to USB 3.0 Hard Drive Adapter with One-Click Backup & LED

SKU CH-686X-20SAD

Connects 2.5 or 3.5 inch SATA and IDE drives via USB 3.0 with one-click offline backup and LED progress indicator

  • Connect 2.5 or 3.5 inch SATA and IDE drives simultaneously for fast data transfer
  • Offline one-click backup copies data without a computer by holding the button three seconds
  • USB 3.0 interface delivers up to 5 Gbps transfer speed and works with USB 2.0 and 1.1
  • Compatible with Windows 10, 8, 8.1, 7, Vista, XP, Mac OS, Linux and Chrome OS
  • Includes 12 V 2 A power adapter, USB 3.0 cable, 4-pin power cable and IDE converter

Universal 2.5/3.5 SATA IDE adapter

The Vszerda adapter connects 2.5-inch or 3.5-inch SATA and IDE hard drives to a host through a USB 3.0 port. It supports simultaneous connection of two drives in either IDE-to-SATA2 or SATA1-to-SATA2 configurations for data transfer. The unit is designed for users who need to access legacy or current drives without installing them internally.

Offline backup and LED progress

A dedicated backup button enables offline cloning from a source drive to a target SATA2 drive without a computer attached. Pressing the button for three seconds starts the process and a blue LED flashes at 25 percent to indicate progress. The package includes a 12V 2A power adapter, a USB 3.0 cable, a 4-pin power cable and an IDE interface converter.

Check drive capacity and host port

Before ordering, verify that the target SATA2 drive capacity is equal to or larger than the source drive for offline cloning. Ensure the host system provides a USB 3.0, 2.0 or 1.1 port and runs Windows XP through 10, Mac OS, Linux or Chrome OS. Note that IDE and SATA1 sources cannot be connected at the same time.

Highlights

  • Connect 2.5 or 3.5 inch SATA and IDE drives simultaneously for fast data transfer
  • Offline one-click backup copies data without a computer by holding the button three seconds
  • USB 3.0 interface delivers up to 5 Gbps transfer speed and works with USB 2.0 and 1.1
  • Compatible with Windows 10, 8, 8.1, 7, Vista, XP, Mac OS, Linux and Chrome OS
  • Includes 12 V 2 A power adapter, USB 3.0 cable, 4-pin power cable and IDE converter

Specifications

No published specifications for this item yet.

Questions about this item

Does the 12 V 2 A power adapter need to be replaced for continuous daily use?

The included 12 V 2 A power adapter is sized for the maximum draw of a 3.5 inch drive; it does not have a rated service interval, so replace it only if the connector loosens or the unit fails to spin up a drive.

What limits sustained transfers at the USB 3.0 port?

The USB 3.0 interface caps throughput at 5 Gbps, and the mechanical drive’s own sequential speed will usually be the first bottleneck during long copies.

How hot does the adapter get when cloning two drives all day?

The plastic housing has no active cooling; under continuous dual-drive cloning it becomes warm to the touch but stays within normal operating temperature for the bridge chip.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.