Vszerda
Vszerda SATA IDE 4Pin Male to 3× SATA Female Splitter Cable 22cm
Converts a single 4-pin power connector into three SATA power ports using 22 cm of 22 AWG tinned-copper cable
- Converts one Molex connector into three SATA power ports
- 22 cm cable keeps internal routing tidy
- 17-strand tinned copper conductors ensure reliable current delivery
- 1007 22 AWG wire rated to 80 °C for safe operation
- Weighs only 19 g to minimise case clutter
One-to-three SATA power splitter
The Vszerda adapter converts a single large 4-pin Molex connector from a power supply into three SATA power ports. It uses 1007 22AWG tinned-copper conductors with PVC insulation and an outer diameter of 1.6 mm. The 22 cm cable weighs 19 grams and is rated for 80 °C operation.
Check connector gender and power budget
Verify that the power supply provides a large 4-pin male Molex plug, because the splitter terminates in a matching female socket. Each SATA device draws power through the shared 17-strand 0.12 mm conductors, so confirm the combined load stays within the supply’s Molex rail limit. The yellow, black and red wires carry standard 12 V, 5 V and ground lines.
Replaces single-drive Molex-to-SATA leads
Builders who previously used one-to-one adapters can now power three SATA drives or peripherals from a single Molex header. The jump is worth it when case routing space is tight and the 22 cm reach covers the drive cage without strain. Users needing more than three SATA power connections or a longer cable run will require a different solution.
Highlights
- Converts one Molex connector into three SATA power ports
- 22 cm cable keeps internal routing tidy
- 17-strand tinned copper conductors ensure reliable current delivery
- 1007 22 AWG wire rated to 80 °C for safe operation
- Weighs only 19 g to minimise case clutter
Specifications
No published specifications for this item yet.
Questions about this item
What connectors come on the Vszerda splitter and do I need any extra cables?
The cable has one large 4-pin female connector on one end and three SATA female connectors on the other. It connects directly to a power supply 4-pin output and up to three SATA drives. No extra cables are required.
Which length should I choose for a standard desktop build?
This model is 22 cm long. Choose it when the power supply 4-pin connector reaches the drive bays within that distance.
What does the 22 cm length mean once the cable is installed in a real machine?
It gives 22 cm between the power supply 4-pin plug and the first SATA connector, with the three SATA ends spaced along the same 22 cm run.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114708BTC
In stock
