We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three red SATA III data cables with locking latches, 15.75 inch length

Vszerda

Vszerda SATA Cable III 3-pack 6 Gbps 15.75 in Red

SKU CH-TDE3-JFRQ6

Three SATA III data cables with locking latches, 15.75 in, 6 Gbps, for drives and optical devices

  • SATA III 6 Gbps transfer speed with Revision 3.0 support
  • Locking latch on each end secures the data connection
  • Three cables in one pack for RAID or spare drives
  • 75 inch length fits standard internal drive bays
  • Connects motherboards to SATA hard drives and DVD drives

Three-Pack SATA III Cables

This set contains three straight SATA III cables, each 15.75 in long, finished in red. They connect motherboards or host controllers to internal Serial ATA hard drives, SSDs and optical drives. A locking latch on both ends secures the link against accidental disconnection. The pack suits builders adding multiple drives or configuring RAID arrays.

Passive Data Links

These cables carry only data and do not supply power to attached drives. Each drive therefore needs its own power connection from the PSU. Rated to the SATA 3.0 specification, they support up to 6 Gbps transfer rates and remain backwards compatible with SATA I and SATA II devices. Actual throughput depends on the capabilities of the connected equipment.

Simple Internal Routing

The 15.75 in length reaches most drive bays in standard chassis layouts without excess slack. Straight connectors keep the cable profile low beside stacked drives or expansion cards. No drivers or configuration are required; the operating system detects the drive once both data and power cables are seated. Builders needing right-angle plugs or longer runs should select a different cable style.

Highlights

  • SATA III 6 Gbps transfer speed with Revision 3.0 support
  • Locking latch on each end secures the data connection
  • Three cables in one pack for RAID or spare drives
  • 75 inch length fits standard internal drive bays
  • Connects motherboards to SATA hard drives and DVD drives

Specifications

No published specifications for this item yet.

Questions about this item

How do I fit the locking latch on the Vszerda SATA III cable so it actually clicks?

Align the latch tab with the port notch, push straight in until you feel a distinct click, then tug gently to confirm it is seated; forcing it at an angle bends the latch and prevents locking.

When should I replace one of the three cables in the pack?

Swap a cable if the latch no longer clicks, the connector wiggles in the port, or you see corroded pins — any of those signs mean the link can drop below the rated 6 Gbps.

What caps the transfer rate first during a long RAID rebuild with these cables?

The slowest device in the chain — drive, controller or port — limits throughput; the cable itself is rated for SATA 3.0 speeds and will not be the bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.