Vszerda SATA cable 2-pack straight and 90° locking latch 50 cm red

Two-cable SATA III pack

This 2-pack supplies one straight and one 90-degree SATA III cable, each 50 cm long, for connecting drives and optical units inside a desktop build. The red nylon-sleeved jackets add durability and make routing easy to identify. Gold-plated locking latches secure every connection against accidental disconnection. Builders who need tidy, reliable links for SATA hard drives, SSDs or optical drives will find both orientations covered in one purchase.

6 Gbps headroom with legacy support

Each cable uses 26 AWG tinned copper conductors rated for SATA revision III at 6 Gbps, while remaining fully backwards compatible with 1.5 and 3 Gbps devices. The 50 cm length reaches most motherboard-to-drive runs without excess slack, but longer routes or external enclosures will need a different cable. Interference-free transmission is maintained across the supported speed range, so older and newer drives share the same link quality.

Locking latch eases tight builds

The straight cable suits open drive bays, while the 90-degree connector fits snug against drive backs where clearance is limited. Both ends lock in place, freeing the builder from re-seating cables after case moves or vibration. No additional adapters or brackets are required; the pack simply plugs into any standard SATA port on the motherboard or controller and the matching port on the drive.