We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black SATA 7-pin right-angle adapters, female to male, 90-degree upward bend

Vszerda

Vszerda SATA 7Pin Female to Male 90° Up Angled Adapter 2-Pack

SKU CH-AKYY-6BAJN

Two 90° up-angled SATA 7-pin female-to-male adapters reroute cables from vertical to horizontal for tight chassis, supporting 6.0, 3.0 and 1.5 Gbps speeds

  • Fits tight chassis with 90° upward angle
  • Re-routes cables from vertical to horizontal
  • Prevents cable twisting for cleaner signal path
  • Supports 6.0Gbps, 3.0Gbps, 1.5Gbps speeds
  • Two adapters included for multiple drives

90° Up-Angled SATA Adapter 2-Pack

This two-piece set provides SATA 7-pin female-to-male connectors that redirect a cable upward by ninety degrees. Builders working in compact desktop chassis use these adapters to route data cables horizontally from vertical motherboard ports. The design removes the need to bend or twist cables in tight spaces. Each adapter supports standard SATA drives including SSDs and HDDs.

SATA 3.0 Interface Speed Limits

The adapters operate at the SATA 3.0 specification and carry signals at 6.0Gbps, 3.0Gbps and 1.5Gbps depending on the connected drive and controller. They do not increase the maximum throughput of the link beyond what the host and device negotiate. Cable length and signal integrity remain governed by the SATA standard. No protocol conversion or speed boost is provided by the adapter itself.

Replaces Twisted Cables in Low-Clearance Builds

These adapters replace the practice of forcing straight cables into cramped headers which can stress ports and degrade signal quality. The upgrade is worthwhile when the motherboard SATA ports sit too close to a graphics card, cooler or case wall for a straight connector to seat cleanly. They are not suited for builds where cables already route without strain or where right-angle routing is not required.

Highlights

  • Fits tight chassis with 90° upward angle
  • Re-routes cables from vertical to horizontal
  • Prevents cable twisting for cleaner signal path
  • Supports 6.0Gbps, 3.0Gbps, 1.5Gbps speeds
  • Two adapters included for multiple drives

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the up-angled or down-angled version for my build?

This pack only contains up-angled adapters that redirect a vertical SATA port 90 degrees toward the motherboard; choose it when the cable must run parallel to the board in a low-profile case.

Will the 6.0 Gbps rating actually give me full SSD speed in my desktop?

The adapter passes SATA 3.0 signals at up to 6.0 Gbps, so a modern SSD will run at its native 6.0 Gbps rate provided the motherboard port and cable also support that speed.

Does the SATA 3.0 interface limit me to older 3.0 Gbps drives?

No, the SATA 3.0 connector is backward compatible and also supports 1.5 Gbps and 3.0 Gbps devices, so any SATA SSD or HDD will work at its own maximum link speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.