We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red nylon-braided SATA cable with 180-degree latch connector, 18 inches long

Vszerda

Vszerda SATA 3.0 cable 18 inches red 180 degree latch

SKU CH-JTP8-JD97M

An 18-inch SATA 3.0 data cable with a straight 180-degree locking latch and 26AWG tinned copper conductors for up to 6.0 Gbps transfers

  • SATA 3.0 delivers up to 6.0 Gbps transfer speed
  • 180 degree latch connector secures the link against vibration
  • 18 inch red nylon braid keeps routing tidy inside the case
  • 26 AWG tinned copper conductors maintain signal integrity
  • Backwards compatible with SATA 1.0 and 2.0 ports

18-inch SATA 3.0 data cable

This 18-inch SATA 3.0 cable connects internal hard drives, SSDs or optical drives to a motherboard or controller. It is for builders upgrading storage or adding a drive in a standard desktop system.

Straight-to-180-degree latch connectors

One end is a straight 7-pin SATA plug and the other is a 180-degree angled plug, both with locking latches. The nylon braid protects the 26AWG tinned copper conductors. Route the angled end toward the drive to avoid tight bends; ensure the latch clicks fully or the link may drop to a lower speed.

6.0 Gbps maximum transfer rate

The cable is rated for SATA 3.0 at up to 6.0 Gbps and is backward compatible with SATA 1.0 and 2.0 ports. The actual throughput will be limited by the slowest connected device. This is a data-only cable and does not carry power.

Highlights

  • SATA 3.0 delivers up to 6.0 Gbps transfer speed
  • 180 degree latch connector secures the link against vibration
  • 18 inch red nylon braid keeps routing tidy inside the case
  • 26 AWG tinned copper conductors maintain signal integrity
  • Backwards compatible with SATA 1.0 and 2.0 ports

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the SATA 3.0 cable is running at 6.0 Gbps after installation?

Check the negotiated link speed in your motherboard BIOS or operating-system storage utility; it will show 6.0 Gbps when the drive and controller both support SATA 3.0.

Does the 18-inch red cable include a power connector or only the 7-pin data ends?

The package contains one sleeved data cable with a straight 7-pin connector on one side and a 180-degree 7-pin connector on the other; no power cable is included.

Should I choose the 18-inch length or a different size for a mid-tower build?

The 18-inch length suits most mid-tower layouts connecting a drive to a motherboard SATA port; measure your routing path to be sure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.