We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90-degree upward angled SATA 22-pin male-to-female adapter

Vszerda

Vszerda SATA 22Pin Male-Female 90° UP Adapter SA-121-UP

SKU CH-WXXM-T7YGX

A 90-degree upward-angled SATA 22-pin male-to-female adapter extends tight drive connections at 6 Gbps

  • TypeSATA
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • ConductorCopper
  • FeaturesData Transfer
  • Fits tight drive bays with a 90-degree upward SATA 22-pin angle
  • Extends SATA 6 Gbps data and power without signal loss using copper conductors
  • Converts a straight SATA 22-pin male port to a female connector for easy cabling
  • Supports 2.5 and 3.5 inch hard drives with a compact 5.63 x 1.46 x 1.3 inch form factor
  • Weighs only .39 ounces to reduce cable strain inside small enclosures

90° UP Angled SATA Adapter

The Vszerda SA-121-UP is a 90-degree up angled gender changer that converts a straight SATA 22-pin port into a vertical orientation. It fits 2.5 and 3.5-inch hard disk drives and supports 6 gigabits per second data transfer through copper conductors. This new adapter suits builders working in tight chassis spaces where straight cables cannot bend cleanly.

Tool-free installation with clearance checks

Push the male 22-pin end into the drive or backplane and the female end accepts a standard SATA cable; no screws or tools are required. The 90-degree up angle points the cable toward the top of the drive, so verify that nothing above the connector blocks the bend. Forcing the adapter into a space shorter than the angled body can damage the port or the cable latch.

Verify port orientation and device height

Confirm the host SATA port faces upward so the adapter’s 90-degree up angle routes the cable in the needed direction. Measure the vertical gap above the drive to ensure the angled body and attached cable fit without pressure. The adapter adds roughly 1.3 inches of height, so drives mounted flush against a panel or shroud may not accept it.

Highlights

  • Fits tight drive bays with a 90-degree upward SATA 22-pin angle
  • Extends SATA 6 Gbps data and power without signal loss using copper conductors
  • Converts a straight SATA 22-pin male port to a female connector for easy cabling
  • Supports 2.5 and 3.5 inch hard drives with a compact 5.63 x 1.46 x 1.3 inch form factor
  • Weighs only .39 ounces to reduce cable strain inside small enclosures

Specifications

Brandchenyang
ModelSA-121-UP
TypeSATA
Connector DetailSata
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

How do I confirm the 6 Gbps SATA link is active after connecting the SA-121-UP?

Check the negotiated speed in your BIOS or OS disk utility; it should report a 6 Gbps SATA connection when the adapter is seated correctly.

What does the Vszerda SA-121-UP package contain and do I need any extra cables?

The box holds the 90-degree up angled 22-pin male-to-female adapter only; you supply the SATA data cable and the drive's own power lead.

Which angled version should I pick for a 2.5 or 3.5 inch drive in a tight chassis?

Choose the SA-121-UP when the SATA port faces upward and a 90-degree upward bend clears the surrounding components.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.