We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA 22-pin male-to-female extender with moulded PVC body and gold-plated contacts

Vszerda

Vszerda SATA 22 Pin Male to Female Extender Adapter, Black

SKU CH-H34X-DPYA9

A 22 pin SATA male to female extender adds reach for 2.5, 3.5 and 1.8 drives while protecting the original port and supporting 6 Gbps data rates

  • Protects original ports on 2.5, 3.5 HDD and SSD
  • Supports up to 6 Gbps across SATA I, II, III
  • Gold-plated copper contacts inside a moulded PVC body
  • Low-profile design with screw holes for secure mounting
  • Compatible with 1.8 SSD, CD, DVD and Blu-ray drives

SATA 22-Pin Extender Adapter

The Vszerda SATA 22-pin male-to-female extender connects a 2.5-inch or 3.5-inch SATA drive to a host port while reducing wear on the original connector. It carries both 7-pin data and 15-pin power lines in a single moulded PVC housing with gold-plated contacts. Screw holes allow the adapter to be secured in place for a stable connection.

Builders extending internal SATA links

Suits system builders who need extra reach between a motherboard or controller and a 2.5-inch SSD, 3.5-inch HDD, 1.8-inch SSD or optical drive. Not intended for SAS environments or for converting SAS signals to SATA. Buyers requiring right-angle connectors or longer cable runs should look at alternative solutions.

Verify port layout and power budget

Confirm the host side presents a standard 22-pin SATA header with the same pin orientation. Ensure the power supply can deliver sufficient current for the attached drive through the extender. Check that chassis clearance accommodates the low-profile moulded body and any secured mounting screws.

Highlights

  • Protects original ports on 2.5, 3.5 HDD and SSD
  • Supports up to 6 Gbps across SATA I, II, III
  • Gold-plated copper contacts inside a moulded PVC body
  • Low-profile design with screw holes for secure mounting
  • Compatible with 1.8 SSD, CD, DVD and Blu-ray drives

Specifications

No published specifications for this item yet.

Questions about this item

What SATA port and power connector does my motherboard need for this 22-pin male-to-female extender?

The extender plugs into a standard SATA 22-pin port that carries 7 data pins and 15 power pins. Your board must provide both data and power on that header.

Will this adapter work with my older SATA I or II drives?

Yes, it is compatible with SATA I, II and III, so drives limited to 1.5 or 3 Gbps will operate normally through the extender.

How can I verify the adapter is passing data at full speed after installation?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6 Gbps for a SATA III drive, confirming the extender is not limiting performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.