We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda SATA 15-pin 1-to-5 power splitter 1.6FT 18AWG

SKU CH-AM6V-SRSPN

Splits one SATA 15-pin power connector into five to run multiple drives from a single PSU output, using 18 AWG copper with locking connectors over a 1.6 ft flat cable

  • TypeSATA
  • Connector DetailIde 4pin to 6×sata
  • Terminal Gender???
  • ConductorCopper
  • Features???
  • Powers five SATA drives from one PSU connector
  • 18 AWG oxygen-free copper conductors ensure reliable current delivery
  • Locking SATA connectors prevent accidental disconnection under vibration
  • Flat parallel ribbon layout keeps cable routing tidy inside the case
  • 50 cm total length reaches drives across mid-tower chassis

SATA 1-to-5 power splitter for drives

This Vszerda cable splits one 15-pin SATA power connector into five female ports. It supports hard drives, SSDs, optical drives and PCI-E cards from a single power supply connection. The 18AWG oxygen-free copper conductors handle 3.3V, 5V and 12V rails across SATA I, II and III devices.

Parallel flat design simplifies case routing

The flat, parallel ribbon layout keeps wires neat and eases cable management through tight case cutouts. Locking connectors resist accidental disconnection during drive swaps. Installers should verify the power supply can deliver sufficient current for five devices simultaneously to avoid voltage drop.

18AWG copper maintains voltage under sustained load

The 1.6 ft total length with 17 cm lead and 8 cm spacing between connectors minimises resistance during continuous operation. PVC jacket and braided shielding protect conductors from heat and abrasion inside a populated chassis. Performance stays stable across all supported voltage rails during extended transfers.

Highlights

  • Powers five SATA drives from one PSU connector
  • 18 AWG oxygen-free copper conductors ensure reliable current delivery
  • Locking SATA connectors prevent accidental disconnection under vibration
  • Flat parallel ribbon layout keeps cable routing tidy inside the case
  • 50 cm total length reaches drives across mid-tower chassis

Specifications

BrandVszerda
ModelYACSEJAO15pin
TypeSATA
Connector DetailIde 4pin to 6×sata
Terminal Gender???
ConductorCopper
Features???

Questions about this item

How can I verify the splitter is delivering power correctly after connecting it?

Connect up to five drives to the 15-pin female connectors, power on the system, and confirm each drive spins up and is recognised by the BIOS or operating system.

What comes in the package and do I need any extra cables or adapters?

The box contains one 15-pin SATA male to five 15-pin SATA female splitter cable; no additional cables or adapters are required if your power supply has a free 15-pin SATA power connector.

Which length and gauge version should I choose for a standard ATX case?

This model provides a total reach of 1.6 ft (50 cm) using 18 AWG copper conductors, suitable for typical internal drive layouts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.