We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black adapter with 29-pin SFF-8482 SAS connector and 22-pin SATA port

Vszerda

Vszerda SAS to SATA Adapter SFF-8482 29Pin to 22Pin Converter

SKU CH-5GKS-GE6GN

Connects a 29-pin SAS drive to a 22-pin SATA controller via SFF-8482 interface

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Convert 29-pin SAS interface to 22-pin SATA connection
  • Requires motherboard SAS support or drive SATA mode
  • Method 1: Separate data and power for SATA drive
  • Method 2: Direct SAS interface SFF-8482 with power cord

Purpose and Compatibility

This Vszerda adapter converts a SFF-8482 29-pin SAS interface to a standard SATA 22-pin connector. It is designed for builders who need to attach a SAS hard disk to a motherboard or controller that already provides native SAS support, or to a SAS drive that can operate in SATA mode. The product does not add SAS capability to a plain SATA port.

Sustained Operation

The adapter functions as a passive electrical bridge, so data throughput and error rates depend entirely on the host controller and the drive firmware. Under continuous read or write workloads the link remains stable only when the motherboard SAS chip or the drive SATA mode is correctly configured. No active signal conditioning or buffering is present on the board.

Build and Connectors

The moulded housing carries a 29-pin SFF-8482 plug on one side and a combined 22-pin SATA data-and-power receptacle on the other. Gold-plated contacts resist oxidation during repeated insertions, and the rigid body prevents cable strain from flexing the PCB. Installation is a simple plug-in action; no drivers or external power are required beyond what the host port supplies.

Highlights

  • Connect SAS HDD via SFF-8482 to hybrid SATA controller
  • Convert 29-pin SAS interface to 22-pin SATA connection
  • Requires motherboard SAS support or drive SATA mode
  • Method 1: Separate data and power for SATA drive
  • Method 2: Direct SAS interface SFF-8482 with power cord

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter generate extra heat or noise when running a SAS drive continuously?

The passive converter has no active components, so it adds no measurable heat or noise during all-day operation.

What existing hardware must I already have for this adapter to function?

You need either a motherboard with a native SAS controller or a SAS hard drive that explicitly supports SATA mode; a standard SATA-only board will not work.

Will this adapter let me keep using an older SATA controller with a newer SFF-8482 SAS drive?

Only if the older controller is a hybrid SAS/SATA model; a pure SATA controller cannot communicate with the SAS drive through this adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.