We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8484 32-pin connector splitting to four SATA 7-pin plugs, 1.64ft cable

Vszerda

Vszerda SAS SFF-8484 to 4 SATA cable 1.64ft

SKU CH-2DCQ-83DTG

Connects four SATA drives to a single SFF-8484 controller with 6 Gbps transfer over a 1.64 ft cable

  • Connect 4 SATA drives to one SFF-8484 controller host
  • 32-pin SFF-8484 breaks out to four 7-pin SATA connectors
  • 64 ft cable length fits tight server chassis
  • Supports 6 Gbps data transfer rate for fast throughput
  • Includes SFF-8448 sideband signals for full controller communication

Connection type

The Vszerda cable connects a single SFF-8484 32-pin host port to four SATA 7-pin device connectors. It is built for internal use in servers, workstations and desktops that rely on SAS controllers or SATA back-planes.

Who it suits

This breakout cable fits builders who need to attach up to four SATA drives to one multilane SAS host connector. It will not suit installations that require a different host interface or longer cable runs than the 1.64 ft length provided.

Deciding specification

The host connector is a 32-pin SFF-8484 interface with SFF-8448 sideband signals. Verify that your controller or back-plane presents this exact connector before purchasing.

Highlights

  • Connect 4 SATA drives to one SFF-8484 controller host
  • 32-pin SFF-8484 breaks out to four 7-pin SATA connectors
  • 64 ft cable length fits tight server chassis
  • Supports 6 Gbps data transfer rate for fast throughput
  • Includes SFF-8448 sideband signals for full controller communication

Specifications

No published specifications for this item yet.

Questions about this item

What controller connector does my host need for this SFF-8484 cable to work?

The host must provide a 32-pin SFF-8484 port that carries four SAS lanes and SFF-8448 sideband signals.

Can I plug my existing 6 Gbps SATA drives into the four SATA connectors on this breakout?

Yes, each 7-pin SATA connector supports drives running at up to 6 Gbps, matching the cable's rated bandwidth.

How do I confirm the cable is delivering 6 Gbps links after installation?

Check the host controller BIOS or operating-system disk utility; every attached drive should report a negotiated 6 Gbps link speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.