We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two flat braided cables with 29-pin SAS and 7-pin SATA plus 4-pin power connectors

Vszerda

Vszerda SAS SFF-8482 29 Pin to SATA III 3.0 7Pin + IDE 4Pin 30cm 2pcs sata cable

SKU CH-2C0K-DQ88N

Connects SAS SFF-8482 29-pin drives to SATA 3.0 7-pin motherboards with IDE 4-pin power, 30 cm length, two cables included

  • TypeSATA
  • Connector DetailSas to Sata
  • Terminal GenderFemale-to-Female
  • FeaturesData Transfer
  • Connects SAS drives to SATA motherboards via SFF-8482 29 Pin
  • Supplies drive power through IDE 4Pin Molex LP4 connector
  • Functions as standard SATA III 3.0 data cable
  • Flat 30cm length with soft PVC and nylon braid for easy routing
  • Requires SAS-capable motherboard, add-in card or SATA-mode drive

SAS to SATA adapter cable

This Vszerda cable converts a SAS SFF-8482 29-pin connector to a SATA III 7-pin data port plus an IDE 4-pin Molex power plug. It is built for technicians who need to attach SAS hard drives or SSDs to a standard SATA motherboard header while supplying auxiliary power. The 30 cm length and flexible braided sheath suit tight server or workstation chassis.

Replaces direct SAS backplane wiring

The assembly lets you move from a dedicated SAS backplane or HBA to a common SATA controller when the host board includes a SAS chipset or an add-in card such as an LSI 3041 series. The jump is worthwhile when you have SAS drives that also support SATA mode and you want simpler cabling without a full SAS expander. Power must be off before connecting or disconnecting to avoid device damage.

Suits builders with SAS drives and SATA hosts

This kit serves integrators who own 29-pin SAS storage and a motherboard or RAID card that presents a 7-pin SATA interface with an available Molex lead. It will not work for systems lacking SAS capability on the host side, for pure SATA drives that need no conversion, or for installations requiring longer reach than 30 cm.

Highlights

  • Connects SAS drives to SATA motherboards via SFF-8482 29 Pin
  • Supplies drive power through IDE 4Pin Molex LP4 connector
  • Functions as standard SATA III 3.0 data cable
  • Flat 30cm length with soft PVC and nylon braid for easy routing
  • Requires SAS-capable motherboard, add-in card or SATA-mode drive

Specifications

BrandYARCHONN
ModelYR-250045DL1
TypeSATA
Connector DetailSas to Sata
Terminal GenderFemale-to-Female
FeaturesData Transfer

Questions about this item

What connectors does the SFF-8482 end and the SATA end use?

The SFF-8482 end is a 29-pin female SAS connector; the other end is a 7-pin SATA 3.0 female connector plus a 4-pin IDE Molex LP4 power connector.

How do I install the cable and what mistake should I avoid?

Power off the system first. Connect the 29-pin end to the SAS drive, the 7-pin end to the SATA motherboard port, and the 4-pin plug to a Molex power lead. Never plug or unplug while power is on.

When will the 30 cm flat PVC and nylon braided cable need replacement?

Replace it if the sheath frays, connectors loosen, or drives drop from the RAID array, signalling signal or power loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.