Vszerda
Vszerda SAS SFF-8482 29-pin to SATA 22-pin cable with IDE 4-pin power
Connects 29-pin SAS drives to 22-pin SATA ports with IDE 4-pin power at 6 gigabytes per second
- TypeCY SAS Cable SFF-8482 SAS 29 Pin to SATA 22Pin Hard Disk Dri
- ColorBlue Cable SAS29P-SATA7P+IDE
- Connector DetailSas Sata
- Terminal GenderMale-to-Female
- Speed6 gigabytes_per_second
- ConductorCopper
- Connect SAS drives to SAS controllers via SFF-8482 29-pin interface
- Link SATA drives to SATA motherboards using 22-pin connector
- Power attached drives through integrated IDE 4-pin port
- Male-to-female design extends reach inside RAID enclosures
- Copper conductors support 6 gigabytes_per_second data rate
SAS-to-SATA adapter for mixed drive setups
This cable bridges a SAS drive with an SFF-8482 connector to a SATA host port while supplying power through an IDE four-pin plug. It suits builders who need to attach a single SAS hard disk to a SATA-based RAID controller or motherboard that already includes SAS chipset support. The 29-pin to 22-pin layout carries both data and power in one assembly.
Passive copper link with 6 Gb/s rating
The conductors are copper and the assembly is passive, so it adds no active circuitry or latency to the link. Rated at 6 gigabytes per second, it matches the SATA III and SAS-2 signalling ceiling without drawing extra power beyond the drive itself. Blue jacket colour helps identify the cable in a dense backplane.
Replaces separate data and power leads
It consolidates a SAS data cable and a Molex-to-SATA power adapter into one run, reducing clutter in 2.5-inch or 3.5-inch drive bays. The jump is worthwhile when the host side exposes a SAS-capable SATA port and the drive side uses the SFF-8482 interface. Not for connecting a SAS drive to a plain SATA-only motherboard or a SATA drive to a pure SAS backplane.
Highlights
- Connect SAS drives to SAS controllers via SFF-8482 29-pin interface
- Link SATA drives to SATA motherboards using 22-pin connector
- Power attached drives through integrated IDE 4-pin port
- Male-to-female design extends reach inside RAID enclosures
- Copper conductors support 6 gigabytes_per_second data rate
Specifications
| Brand | CY |
|---|---|
| Model | HX-SF-011 |
| Type | CY SAS Cable SFF-8482 SAS 29 Pin to SATA 22Pin Hard Disk Drive Raid Extension Cable with IDE 4Pin Power Port |
| Color | Blue Cable SAS29P-SATA7P+IDE |
| Connector Detail | Sas Sata |
| Terminal Gender | Male-to-Female |
| Speed | 6 gigabytes_per_second |
| Conductor | Copper |
| Features | SAS SATA |
Questions about this item
How do I plug the SFF-8482 29-pin end into a SAS controller, and which way does the keyed notch face?
Align the SFF-8482 male connector with the controller port so the notch matches the key; push straight in until it clicks — the notch only fits one way.
Does the IDE 4-pin power lead need periodic replacement, or is the copper conductor rated for the life of the drive?
The copper conductors and IDE 4-pin plug are rated for continuous use; no scheduled replacement is required unless physical damage or corrosion appears.
At 6 gigabytes per second, what thermal or signal limit appears first during sustained RAID rebuilds?
The 6 GB/s interface and copper conductors handle sustained RAID rebuild traffic; the first practical limit is usually the drive’s own sustained transfer rate, not the cable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115782BTC
In stock
