We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angle SAS 22 pin adapter with 7 pin SATA and 15 pin power connectors

Vszerda

Vszerda SAS 22 Pin to 7 Pin + 15 Pin SATA Raid Adapter Right Angle 90 Degree

SKU CH-MAKB-WC1EW

Connects a SAS hard drive with an SFF-8482 port to a SATA controller using a right-angle 90-degree adapter with 22-pin, 7-pin and 15-pin connectors

  • TypeSATA
  • ColorBlack
  • Connector DetailSata
  • Terminal GenderMale-to-Male
  • ConductorCopper
  • Connect SAS HDDs to SATA controllers via SFF-8482 port
  • Right-angle 90-degree design fits tight chassis spaces
  • Single adapter provides 7-pin data and 15-pin power links
  • Copper conductors ensure reliable signal and power delivery
  • Male-to-male terminals simplify direct drive-to-controller connection

What this adapter does

The Vszerda SAS 22 Pin to 7 Pin + 15 Pin SATA Raid Adapter connects a SAS hard drive with an SFF-8482 port to a SAS-compatible SATA controller. It bridges the 22-pin SAS interface to separate 7-pin data and 15-pin power connectors. The right-angle 90-degree design helps routing in tight drive bays. It is built for builders adding SAS storage to a SATA host.

Connectors and power delivery

The adapter carries one 22-pin SAS male connector on the drive side and splits to one 7-pin SATA male and one 15-pin male power connector on the controller side. Copper conductors handle the data and power paths. No extra cables or drivers are included in the package. The 15-pin power port supplies the drive directly from the host or backplane.

Installation notes

Plug the 22-pin end into the SAS drive and the 7-pin and 15-pin ends into the controller or backplane. The right-angle SAS connector reduces strain but needs enough clearance behind the drive. The adapter only works with SAS-compatible SATA controllers; it will not function on a standard SATA-only host. Buyers who need to connect a SATA drive to a SAS controller or who require hot-plug support should look elsewhere.

Highlights

  • Connect SAS HDDs to SATA controllers via SFF-8482 port
  • Right-angle 90-degree design fits tight chassis spaces
  • Single adapter provides 7-pin data and 15-pin power links
  • Copper conductors ensure reliable signal and power delivery
  • Male-to-male terminals simplify direct drive-to-controller connection

Specifications

BrandzdyCGTime
Model8541686572
TypeSATA
ColorBlack
Connector DetailSata
Terminal GenderMale-to-Male
ConductorCopper

Questions about this item

Will the 15-pin power connector need replacing after repeated drive swaps?

The 15-pin male power connector is soldered to the copper conductor and rated for standard SATA mating cycles; treat it like any internal drive power lead and replace only if pins bend or the housing cracks.

What limits sustained throughput when a SAS HDD runs through the SFF-8482 22-pin interface?

The adapter passes the native SAS signalling of the attached drive; sustained throughput is therefore limited by the drive itself and the host controller, not by the passive copper traces in this 90-degree adapter.

Does the right-angle 90-degree housing trap heat or add noise during all-day operation?

The adapter has no active components, draws no power of its own and generates no noise; its copper conductors and black plastic housing add negligible thermal load inside a normal chassis airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.