We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
USB-C M.2 NVMe SATA SSD enclosure aluminium case

Vszerda

Vszerda SA36NVME internal power cable

SKU CH-NGGY-7RZR6 MPN SA36NVME

Tool-free enclosure connects M.2 NVMe and SATA SSDs up to 8 TB via USB 3.1 Gen 2 at 10 Gbps

  • Supports M.2 NVME and SATA SSDs up to 8TB
  • 10Gbps transfer speed via USB 3.1 Gen 2
  • Tool-free installation with 2-in-1 USB-A and USB-C cable
  • Aluminium alloy body dissipates heat during extended use
  • Compatible with 2230 2242 2260 2280 form factors

Wide M.2 NVME SATA support

This enclosure accepts M.2 NVME PCIe and M.2 SATA SSDs with M-Key or B+M connectors in 2230, 2242, 2260 and 2280 lengths. It works with Windows, Mac OS, Linux, Android and IOS systems. Buyers needing B-Key only drives, M.2 PCIe AHCI SSDs, mSATA modules or non-M.2 form factors cannot use this adapter.

Aluminium heat dissipation

The aluminium alloy body acts as a heatsink to keep the SSD cool during extended transfers. No fan is included and no active cooling is required. Power is drawn from the host USB port so no external supply is needed.

Tool-free 2-in-1 USB-C and USB-A

A tool-free sliding tray lets you install or swap drives in seconds. The included cable provides both USB-C and USB-A connectors for direct connection to either port type. The drive receives power and data through the single USB link, freeing internal drive bays and SATA cables inside the chassis.

Highlights

  • Supports M.2 NVME and SATA SSDs up to 8TB
  • 10Gbps transfer speed via USB 3.1 Gen 2
  • Tool-free installation with 2-in-1 USB-A and USB-C cable
  • Aluminium alloy body dissipates heat during extended use
  • Compatible with 2230 2242 2260 2280 form factors

Specifications

No published specifications for this item yet.

Questions about this item

How do I install an M.2 2280 NVME SSD into the SA36NVME enclosure without tools?

Slide the SSD into the M-Key or B+M slot at a slight angle, press down until it clicks into the tool-free latch, then snap the aluminium cover shut; no screwdriver is required.

What part of the SA36NVME enclosure will need replacement if the USB 3.1 Gen 2 cable frays after heavy daily use?

The included USB 3.1 Gen 2 cable is detachable, so only the cable itself needs replacing; the aluminium enclosure and tool-free latch remain serviceable.

At what speed ceiling does the SA36NVME enclosure hit its limit during sustained large-file transfers?

The USB 3.1 Gen 2 interface caps sustained throughput at 10 Gbps, so real-world sequential transfers plateau at that bandwidth regardless of the NVME SSD’s own rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.