We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SlimSAS 38-pin to U.3 68-pin cable with SATA power, 75 cm

Vszerda

Vszerda RSL38-3600-AX1 SFF-8654 38Pin to SFF-8639 68Pin sata cable 75cm

SKU CH-XMN7-0DK76

Connects SFF-8654 SlimSAS x4 to SFF-8639 U.3 NVMe with SATA power over 75cm, supporting PCIe 4.0 at 16Gbps per lane

  • TypeSFF-8654 to SFF-8639
  • Terminal GenderMale-to-Female
  • Speed16 gigabits_per_second
  • ConductorCopper
  • FeaturesPCIe 4.0 SlimsSAS x4 to U.3 NVMe Adapter
  • PCIe 4.0 SlimsSAS x4 delivers 64 Gbps total bandwidth
  • SFF-8639 U.3 connector supports PCIe 3.0 at 32 Gbps total
  • SFF-8639 also handles SATA and SAS protocols
  • 75 cm copper cable fits high-density server builds
  • Adapter works with U.3 NVMe SSDs only, not U.2

Vszerda SFF-8654 to SFF-8639 Adapter

This Vszerda adapter connects a SlimSAS x4 host port (SFF-8654 38-pin) to a U.3 NVMe drive bay (SFF-8639 68-pin). It includes a SATA power lead and measures 75cm in length. The copper conductors carry PCIe 4.0 signalling at up to 16Gbps per lane. It is built for high-density server or workstation deployments.

Upgrading from PCIe 3.0 U.2 or U.3 backplanes

The SFF-8654 end delivers 64Gbps aggregate bandwidth across four lanes using PCIe 4.0. The SFF-8639 receptacle is limited to PCIe 3.0 speeds of 8Gbps per lane, totalling 32Gbps. The jump is worth it when the host controller and SSD both support PCIe 4.0, allowing the drive to run at its rated throughput rather than being capped by the older interface.

Check host port, drive type

Verify that the host side presents a male SFF-8654 connector wired for PCIe 4.0 x4. The drive must be a U.3 NVMe SSD; the adapter explicitly does not support U.2 NVMe SSDs. Ensure the SATA power connector can reach your power supply and that the 75cm cable length fits your chassis routing. Compatibility with mixed SAS or SATA devices on the SFF-8639 side is supported by the connector specification.

Highlights

  • PCIe 4.0 SlimsSAS x4 delivers 64 Gbps total bandwidth
  • SFF-8639 U.3 connector supports PCIe 3.0 at 32 Gbps total
  • SFF-8639 also handles SATA and SAS protocols
  • 75 cm copper cable fits high-density server builds
  • Adapter works with U.3 NVMe SSDs only, not U.2

Specifications

BrandVszerda
ModelRSL38-3600-AX1
TypeSFF-8654 to SFF-8639
Terminal GenderMale-to-Female
Speed16 gigabits_per_second
ConductorCopper
FeaturesPCIe 4.0 SlimsSAS x4 to U.3 NVMe Adapter

Questions about this item

What clearance does the SFF-8654 38Pin connector need to plug into a SlimSAS x4 port?

The compact SFF-8654 38Pin male connector fits standard SlimSAS x4 receptacles; allow a few millimetres behind the port for the cable bend radius.

Which end connects first when installing the SFF-8654 to SFF-8639 cable with SATA power?

Attach the SFF-8654 38Pin side to the host SlimSAS x4 port, then plug the SFF-8639 68Pin female end into the U.3 NVMe SSD, finally connect the SATA power lead to the PSU.

When should the SATA power lead on this 75cm adapter be inspected or replaced?

Check the SATA power connector whenever you reseat the U.3 NVMe drive; replace the cable if the power pins show discolouration or the latch no longer clicks securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.