Vszerda
Vszerda RP-SMA Coaxial Extension Cable Male to Female 1m 2-pack
A 1 m RP‑SMA male‑to‑female coaxial extension cable, 50 ohm, for 2.4 GHz Wi‑Fi antennas, two per pack
- ColorBlack
- Two cables let you position antennas for better signal
- 1 metre length gives placement flexibility without excess slack
- 50 ohm coaxial wire preserves wireless signal integrity
- RP‑SMA male to female connectors fit common router and antenna gear
- IEEE 802.11 a/b/g/n compliant for 2.4 GHz Wi‑Fi networks
RP-SMA Antenna Extension Cable 1 m 2-pack
Two RP-SMA male-to-female coaxial cables extend a Wi-Fi or cellular antenna by one metre each. They suit router, bridge or desktop-antenna setups that need the antenna moved away from the device for better signal. The 50 ohm engineering-grade wire is built for 2.4 GHz wireless LAN equipment. Not intended for TV or broadcast antennas.
Pure-copper RP-SMA connectors
Each cable terminates in an RP-SMA male plug and an RP-SMA female jack, not standard SMA, so they mate only with matching RP-SMA ports on routers, cards or external antennas. The one-metre black jacket gives enough slack to route around chassis or through panel openings without sharp bends. Supplied as a pair for dual-antenna MIMO devices or separate nodes.
IEEE 802.11 a/b/g/n compliant for 2.4 GHz band
The cables meet the physical-layer requirements of 802.11 a, b, g and n wireless LANs operating at 2.4 GHz. Attenuation and impedance are characterised for 50 ohm systems up to 24 dBi antenna gain. They do not carry TV signals and are not rated for other frequency bands or connector types.
Highlights
- Two cables let you position antennas for better signal
- 1 metre length gives placement flexibility without excess slack
- 50 ohm coaxial wire preserves wireless signal integrity
- RP‑SMA male to female connectors fit common router and antenna gear
- IEEE 802.11 a/b/g/n compliant for 2.4 GHz Wi‑Fi networks
Specifications
| Brand | CORONIR |
|---|---|
| Model | 791568632016 |
| Color | Black |
Questions about this item
What wireless standard does the RP-SMA cable support, and what frequency band does it cover?
The cable is compliant with IEEE 802.11a/b/g/n and works with multilevel coverage in the 2.4 GHz band.
What connector types and impedance does the cable use for a secure fit?
It has RP-SMA male and RP-SMA female connectors with 50 ohm pure copper joints.
How do you install the extension, and what common mistake should be avoided?
Connect the male end to the device and the female end to the antenna; do not confuse RP-SMA with standard SMA connectors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
