We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ50 10P10C right-angle male to female panel mount cable, 30cm

Vszerda

Vszerda RJ50 10P10C 90° Right Angle Panel Mount Ethernet Extension Cable 30cm

SKU CH-4R4P-1NEXG

A 30 cm shielded RJ50 10P10C extension cable with a 90° right-angle male connector and panel-mount female end, protecting ports in tight spaces

  • TypeEthernet
  • Connector ARj50
  • ColorBlack
  • Features, , , ,
  • 90° right-angle connector fits tight spaces and reduces cable strain
  • 30 cm shielded Cat5E cable extends RJ50 links without signal loss
  • Panel-mount design with M3 screws secures the jack in equipment racks
  • 10P10C pinout supports Motorola radios, TETRA gear and Medusa/Octoplus boxes
  • 26 AWG aluminium-foil shielding protects data from external interference

Right-Angle RJ50 Panel Mount Cable

This 30 cm shielded extension cable carries a 10P10C RJ50 female port on one end and a 90° right-angle male plug on the other. It is built for installers who need to leave a permanent feed in tight equipment bays while protecting the device port from repeated mating cycles.

Replacing Worn Straight Patch Leads

Swap out a straight RJ50 patch cord when the connector fouls a chassis wall or when frequent disconnects have damaged the equipment jack. The right-angle male end clears low-profile enclosures, and the panel-mount flange secures the female side so the link stays intact during vibration or cable tugs.

Screw-Flange Install with Shielded 26 AWG

Two M3 screws fasten the female bulkhead to a panel cut-out; no special tools are required beyond a screwdriver. The 10-core foil-shielded conductors reject external noise, but the 30 cm length limits reach — verify the device-to-panel distance before cutting the mounting hole.

Highlights

  • 90° right-angle connector fits tight spaces and reduces cable strain
  • 30 cm shielded Cat5E cable extends RJ50 links without signal loss
  • Panel-mount design with M3 screws secures the jack in equipment racks
  • 10P10C pinout supports Motorola radios, TETRA gear and Medusa/Octoplus boxes
  • 26 AWG aluminium-foil shielding protects data from external interference

Specifications

BrandQIANRENON
TypeEthernet
Connector ARj50
ColorBlack
Features, , , ,

Questions about this item

What panel cutout and screw spacing does the RJ50 10P10C panel-mount connector need?

The cable includes two M3 screws for the panel-mount flange; drill a standard RJ50/RJ45 rectangular cutout and use the M3 holes on the flange to secure it.

How do I orient the 90° right-angle male plug during installation, and what is the common mistake?

The plug bends 90° to the right; route the 30 cm cable so the bend points toward the panel, not away, otherwise the right-angle defeats its purpose in tight spaces.

When should I replace the 26AWG shielded 10-core cable?

Replace it if the black jacket cracks, the right-angle plug becomes loose, or the aluminum-foil shielding is exposed after repeated flexing in tight spaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.