We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact aluminium RJ45 surge protector, 68 by 26 by 26 mm, shielded finish

Vszerda

Vszerda RJ45 Surge Protector 10/100M network ethernet cable

SKU CH-YT8Z-6N6DF

Protects Ethernet equipment from lightning surges at 10 or 100 Mbps, installs inline with grounded RJ45 connections in a shielded aluminium housing

  • Protects Ethernet gear from lightning surges
  • Supports 10/100 Mbps network speeds
  • Shielded aluminium alloy housing resists interference
  • Compact 68 × 26 × 26 mm fits tight spaces
  • Simple in-line install with grounded protection

Protection for 10/100M Ethernet

This RJ-45 surge protector shields network cards, switches, routers and other Ethernet equipment from lightning strikes and power surges. It supports 10BaseT and 100BaseTX standards at 10M and 100M data transfer rates. The shielded aluminum alloy housing measures 68mm by 26mm by 26mm and installs inline between the incoming line and the protected device.

Replaces unprotected patch cables

The unit upgrades a standard cable run by adding surge suppression without changing the network topology. The jump is worth it when equipment sits in areas prone to electrical storms or where induced voltage on long cable runs risks damaging sensitive ports. Install within one metre of the device for best results; the closer the better.

Fits inline on existing RJ-45 runs

Connect the "IN" port to the network side and the "OUT" port to the equipment, then attach the ground wire securely. The device requires a solid earth connection to function and does not supply power or boost signal strength. It frees up no rack space but adds protection without needing an external power source or software configuration.

Highlights

  • Protects Ethernet gear from lightning surges
  • Supports 10/100 Mbps network speeds
  • Shielded aluminium alloy housing resists interference
  • Compact 68 × 26 × 26 mm fits tight spaces
  • Simple in-line install with grounded protection

Specifications

No published specifications for this item yet.

Questions about this item

What are the dimensions of the Vszerda RJ45 surge protector?

The unit measures 68 mm long by 26 mm wide by 26 mm high, so check that your patch panel or wall box has enough clearance for this footprint.

Which way do the IN and OUT ports face during installation?

Connect the incoming line to the port marked IN and the protected device to the port marked OUT; reversing them leaves the equipment unprotected.

How often should the ground wire connection be inspected?

Check the ground wire at least once a year and after any severe storm to confirm it remains tight and corrosion-free.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.