We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ45 Ethernet splitter with one male plug and two female ports

Vszerda

Vszerda RJ45 Ethernet Splitter 1 Male to 2 Female Black

SKU CH-ND6H-ESG61

Splits one Ethernet cable into two ports so two devices can share a 100 Mbps connection

  • Two computers share one cable simultaneously
  • Metal shielding blocks electromagnetic interference for stable 100 Mbps links
  • Advanced CMOS design keeps total draw at 0.55 W even at full load
  • Plug-and-play RJ45 ports need no drivers or configuration
  • Works with Cat5 through Cat7 plus ADSL, routers, TVs and set-top boxes

RJ45 Ethernet Splitter for Two Devices

This RJ45 splitter divides one network cable into two outputs so two computers can share a single Ethernet port. It supports Cat5, Cat5e, Cat6 and Cat7 cables and works with ADSL, routers, hubs and set-top boxes. The metal-shielded connectors block EMI and RFI for a stable 100 Mbps connection up to 100 m.

Home and Office Users Sharing One Port

The adapter suits households or small offices where only one wall jack is available but two wired devices need internet access. It is not for networks that require full-duplex gigabit speeds on both ports simultaneously. Builders needing managed switching, VLAN support or PoE pass-through should look at a powered switch instead.

Single USB Power Draw of 0.55 W

The splitter draws only 0.55 W from a USB supply thanks to its CMOS design and embedded LDO. When connected devices lack IEEE 802.3az support the chip drops the link to 10 Mbps to save power. This ultra-low consumption means it can run from any standard USB port without an external power brick.

Highlights

  • Two computers share one cable simultaneously
  • Metal shielding blocks electromagnetic interference for stable 100 Mbps links
  • Advanced CMOS design keeps total draw at 0.55 W even at full load
  • Plug-and-play RJ45 ports need no drivers or configuration
  • Works with Cat5 through Cat7 plus ADSL, routers, TVs and set-top boxes

Specifications

No published specifications for this item yet.

Questions about this item

Does the splitter come with any cables or a USB power supply, or do I need to buy them separately?

The package contains only the splitter unit itself; a USB power source and two Ethernet patch cables must be supplied by the user.

Should I choose this 1-to-2 model or look for a different version if I need to connect more than two devices?

This model provides exactly two female RJ45 ports from one male plug; connecting more than two devices would require a separate switch or additional splitters.

The description mentions 100 Mbps — will I actually see that speed on my Cat6 or Cat7 cables?

The splitter is rated for up to 100 Mbps over distances up to 100 m on Cat5 through Cat7 cables; actual throughput will not exceed that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.