We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda RJ45 1-to-2 Ethernet Splitter 1000Mbps network ethernet cable

SKU CH-SXMG-KSQYJ

A powered RJ45 1-to-2 splitter shares one gigabit Ethernet line between two devices using the included USB cable

  • Connect two devices from one port using the included USB power cable
  • Achieve up to 1000 Mbps data transfer for fast file sharing
  • Works with Cat5 through Cat8 cables for broad compatibility
  • Compatible with routers, switches, TVs and computers for versatile use
  • Solves insufficient wiring by expanding a single Ethernet connection into two

What this splitter does

The Vszerda RJ45 1-to-2 Ethernet Splitter lets a single router or switch port serve two wired devices at once. It is built for homes or small offices where extra cabling is impractical and a second network drop is needed quickly. A USB cable is included to power the adapter so both connected computers can share the line simultaneously. The unit supports gigabit transmission up to 1000Mbps.

Check your cabling and power

Verify that the existing cable run uses Cat5, Cat5e, Cat6, Cat7 or Cat8 wiring with standard RJ45 8P8C plugs. The splitter requires a free USB port or USB charger to supply power; without it the second port will not operate. Confirm the router or switch port you plan to use is active and configured for the speed you expect.

How it fits in a build

Plug the splitter into the single wall jack or switch port, connect the USB cable for power, then attach two patch cables to your PC, TV, set-top box or other wired gear. It frees you from pulling a second cable through walls while keeping both devices on the network. The adapter works with ADSL modems, hubs, switches and wireless access points that present a standard RJ45 socket.

Highlights

  • Connect two devices from one port using the included USB power cable
  • Achieve up to 1000 Mbps data transfer for fast file sharing
  • Works with Cat5 through Cat8 cables for broad compatibility
  • Compatible with routers, switches, TVs and computers for versatile use
  • Solves insufficient wiring by expanding a single Ethernet connection into two

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda RJ45 splitter include the USB power cable, or do I need to buy Ethernet cables separately?

The package includes a USB cable for power, but you must supply your own Cat5e, Cat6, Cat7 or Cat8 Ethernet cables to connect the two devices.

The listing mentions Cat5 through Cat8 compatibility — which cable category should I choose for the 1000Mbps headline speed?

Any cable rated Cat5e or higher will support the 1000Mbps maximum; Cat5e is the most cost-effective choice, while Cat6 or above adds headroom for future upgrades.

When two computers share the single line through this adapter, will each one actually see 1000Mbps or is that the combined total?

The 1000Mbps figure is the peak throughput of the single uplink; both connected devices share that bandwidth, so simultaneous heavy transfers will split the available speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.