We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver-sleeved DisplayPort cable with 90-degree right-angled connectors, 200cm length

Vszerda

Vszerda Right Angled DisplayPort Cable 4K 60Hz 90 Degree Silver Sleeve 200cm

SKU CH-NT5B-C15PM

A 90-degree DisplayPort cable supporting 4K at 60 Hz with 32.4 Gbps bandwidth and gold-plated connectors

  • Fits tight ports with 90 degree angled connector
  • Silver alloy shell and braided sleeve resist tangles and wear
  • 4 Gbps bandwidth carries 4K at 60 Hz
  • Gold plated connectors ensure stable signal transmission
  • Backward compatible with DisplayPort 1.2 and 1.3 devices

Right-Angled DisplayPort Cable for Tight Spaces

The Vszerda DisplayPort cable uses a 90-degree connector to fit graphics card or monitor ports where rear clearance is limited. It supports 4K resolution at 60 Hz and carries 32.4 Gbps bandwidth for loss-free video. Gold-plated contacts and a welded strain-relief protect the joint from accidental tugs. The two-metre length suits typical desktop-to-monitor runs.

Passive Copper Link with Braided Sleeve

A silver aluminium shell and woven braid jacket prevent tangling and resist wear during routine handling. The passive copper construction draws no external power and adds no active components that could generate heat or noise. Backward compatibility with DP 1.2 and DP 1.3 ensures the cable works with older ports without signal degradation. The assembly is light enough for portable laptop docking.

Simple Drop-In for Standard DisplayPort Ports

The cable plugs directly into any full-size DisplayPort female socket on a graphics card, monitor or laptop dock. No driver, firmware or adapter is required for 1080p, 1440p or 4K 60 Hz operation. It frees up space behind the device by routing the cable parallel to the chassis instead of straight out. Builders needing longer runs, active signal boosting or Mini DisplayPort ends must choose a different product.

Highlights

  • Fits tight ports with 90 degree angled connector
  • Silver alloy shell and braided sleeve resist tangles and wear
  • 4 Gbps bandwidth carries 4K at 60 Hz
  • Gold plated connectors ensure stable signal transmission
  • Backward compatible with DisplayPort 1.2 and 1.3 devices

Specifications

No published specifications for this item yet.

Questions about this item

How do I plug the 90-degree DisplayPort connector into a tight GPU backplate without bending the cable?

Route the right-angled plug so the cable exits parallel to the card, then seat it fully until the gold-plated latch clicks; forcing it straight out risks snapping the welded strain relief.

When will the silver braided sleeve or gold-plated contacts need replacement?

The tangle-free woven jacket and welded ends are built for long-term durability; only replace if the latch fails to engage or you see corrosion on the gold pins after repeated unplugging.

What resolution or refresh limit appears first when running a 4K 60 Hz signal continuously over the 200 cm length?

The 32.4 Gbps bandwidth ceiling caps you at 4K 60 Hz; pushing higher refresh rates or deeper colour at 4K will hit that limit before signal degradation from the copper run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.