We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda RGB cable set with 24-pin and 16-pin to three 8-pin connectors, soft PVC sleeves and LED strips

Vszerda

Vszerda RGB 12VHPWR Cable Set 24Pin 16Pin to 3×8Pin

SKU CH-F2B8-Z41M0

A 24-pin ATX cable with 80 LEDs and a 12VHPWR cable with 81 LEDs connect to a 5 V ARGB header for software-controlled lighting

  • Vibrant RGB lighting with 80 LEDs on the 24-pin cable and 81 on the 12VHPWR
  • Flexible soft PVC and silicone tubing for easy routing in tight cases
  • Plug-and-play ARGB daisy-chain via 5 V header or 3-pin motherboard port
  • 12VHPWR 16-pin to 3×8-pin adapter powers RTX 4070, 4080, 4090 and 3090 Ti up to 600 W
  • 16 AWG wire core ensures stable power delivery for ATX 3.0.16 compliance

Vibrant RGB Cable Set

This Vszerda kit includes a 24-pin ATX motherboard cable with 80 LEDs and a 16-pin 12VHPWR GPU cable with 81 LEDs. Both cables use soft PVC-covered silicone tubes for flexible routing in tight cases. They connect to a 5V ARGB header for software-controlled lighting effects.

12VHPWR Adapter Solution

The 16-pin male to triple 8-pin female cable lets builders run RTX 4070, 4080, 4090 or 3090Ti cards on power supplies lacking a native 12VHPWR connector. It removes the need to upgrade to an ATX 3.0.16 unit while extending cable reach for cleaner cable management.

Sustained 600 W Delivery

The 12VHPWR extension uses 16AWG wire cores rated for up to 600 W continuous output. This gauge maintains stable voltage during long gaming sessions without the voltage drop seen on thinner wires. Daisy-chained ARGB headers stay responsive under full system load.

Highlights

  • Vibrant RGB lighting with 80 LEDs on the 24-pin cable and 81 on the 12VHPWR
  • Flexible soft PVC and silicone tubing for easy routing in tight cases
  • Plug-and-play ARGB daisy-chain via 5 V header or 3-pin motherboard port
  • 12VHPWR 16-pin to 3×8-pin adapter powers RTX 4070, 4080, 4090 and 3090 Ti up to 600 W
  • 16 AWG wire core ensures stable power delivery for ATX 3.0.16 compliance

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 24-pin ATX connector with its 80 LEDs and soft PVC sleeve need behind the motherboard tray?

The 24-pin connector uses a soft PVC sleeve over a flexible LED strip; route it with enough slack so the plug seats fully without bending the strip sharply against the case wall.

Which motherboard header does the ARGB daisy-chain connect to, and what is the common polarity mistake?

Plug the 3-pin 5 V ARGB header into the motherboard's 5 V / Data / Ground pins — reversing the 5 V and Ground pins is the step that prevents the LEDs from lighting.

When should the 16-pin 12VHPWR extension with 81 LEDs be inspected or replaced?

Check the 12VHPWR plug and the three 8-pin sockets after any GPU swap or heavy cable routing; replace the set if any pin shows discoloration, melting or the LED strip stops responding to software control.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.