We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 25 cm cable with M.2 key M connector and PCIe x1 gold-finger plug

Vszerda

Vszerda R14SF eSATA cable 25cm

SKU CH-MEVS-C94G1 MPN R14SF

M.2 NVMe to PCIe x1 signal extension cable, 25 cm wire length, supports PCIe 3.0 full-speed transfer up to 60 cm

  • Conductorgold
  • M.2 NVMe to PCIe x1 adapter with gold-plated contacts
  • 25 cm flexible flat cable for tight builds
  • PCIe 3.0 8 Gbps bandwidth on cables up to 60 cm
  • Differential signals without via holes cut parasitic loss
  • Short thick PCB avoids graphics-card clearance issues

M.2 NVMe to PCIe x1 adapter cable

This Vszerda R14SF cable connects an M.2 M-key NVMe SSD to a PCIe x1 slot for signal extension. The 25 cm flexible flat cable uses gold conductors and imported connectors. It is intended for professional engineers who understand compatibility risks and correct installation procedures.

PCIe 3.0 x1 sustained signal integrity

The differential signal design avoids via holes to reduce parasitic capacitance and inductance interference. Cable lengths up to 60 cm support full PCIe 3.0 8 Gbps bandwidth without CAF micro-short-circuit risk. Signal loss still occurs whenever any extension cable is inserted between motherboard and device.

Professional-only compatibility constraint

This adapter is restricted to professional engineers because incorrect assembly or reverse insertion can burn equipment. Many motherboards and devices exhibit different signal-driving ability, creating compatibility problems. Buyers who need a guaranteed plug-and-play solution for general use should not purchase this part.

Highlights

  • M.2 NVMe to PCIe x1 adapter with gold-plated contacts
  • 25 cm flexible flat cable for tight builds
  • PCIe 3.0 8 Gbps bandwidth on cables up to 60 cm
  • Differential signals without via holes cut parasitic loss
  • Short thick PCB avoids graphics-card clearance issues

Specifications

BrandVszerda
ModelN45324-B2
Conductorgold

Questions about this item

Does the 25 cm cable add heat or noise when the NVMe drive runs continuously?

The cable is passive with gold conductors and no active components, so it adds no heat or noise of its own.

What must my system already have for this adapter to work?

You need a motherboard with a free PCIe x1 slot and an M.2 M-key NVMe drive; the board provides a straight x1 gold-finger male connector to the drive's female M.2 socket.

Will this work with an older PCIe 2.0 motherboard I want to keep?

The cable is rated for PCIe 3.0 x1 at 8 Gbps; on a PCIe 2.0 slot it will fall back to that slot's lower bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.