We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
QSFP28 breakout cable splitting to four SFP28 ends, 1.5m grey cable

Vszerda

Vszerda QSFP28 to 4xSFP28 Breakout Cable 1.5m

SKU CH-8E27-HMBGQ

A 1.5 metre 100Gbps QSFP28 to 4xSFP28 breakout DAC cable for high-speed LAN, HPC and SAN links

Cable Length 4.92 ft. / 1.5m

  • 100Gbps aggregate throughput for high-density LAN, HPC and SAN links
  • QSFP28 to 4×SFP28 breakout splits one port into four channels
  • IEEE 802.3 bj, 802.3 by and InfiniBand EDR compliant
  • 26AWG to 30AWG construction minimises insertion loss and crosstalk
  • 5m length with pull-to-release latch for dense rack installs

100Gbps QSFP28 Breakout Cable 1.5m

This 1.5 metre cable splits a single QSFP28 port into four SFP28 connections for 100 Gbps aggregate throughput. It is built for LAN, HPC and SAN environments where high-density interconnects are required. The assembly meets IEEE 802.3 bj, IEEE 802.3 by and InfiniBand EDR specifications. A pull-to-release slide latch secures each connector.

Suits racks needing four 28 Gbps lanes from one

Installers who need a 100 Gbps fan-out with 26 to 30 AWG conductors and customised EEPROM mapping will benefit. Builders requiring longer reach than 1.5 metres or a different breakout ratio should consider other options. The RoHS compliant jacket limits EMI radiation in dense cable trays.

100 Gbps aggregate data rate over 1.5 metres

This single figure determines whether the cable matches the link budget and rack layout. Verify the 1.5 metre length and 26 to 30 AWG gauge against your port spacing before ordering. Compatibility with specific equipment models must be confirmed at purchase.

Highlights

  • 100Gbps aggregate throughput for high-density LAN, HPC and SAN links
  • QSFP28 to 4×SFP28 breakout splits one port into four channels
  • IEEE 802.3 bj, 802.3 by and InfiniBand EDR compliant
  • 26AWG to 30AWG construction minimises insertion loss and crosstalk
  • 5m length with pull-to-release latch for dense rack installs

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 1.5m breakout cable work with the QSFP+ ports I already have in my older switches?

Yes, the cable is backward compatible with existing QSFP+ connectors and cages, so it can plug directly into those older ports.

What indicators confirm the 100Gbps link is operating correctly after I connect the four SFP28 ends?

The link LEDs on each SFP28 port should show solid green, and the switch management interface will report a 100Gbps aggregate rate with no CRC errors.

Does the package include the four SFP28 transceivers or only the cable assembly itself?

The cable assembly has SFP28 connectors permanently attached at each breakout end, so no separate transceivers are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.