We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
QSFP to Mini SAS SFF-8644 copper cable, male-to-male connectors, 3.3 ft length

Vszerda

Vszerda QSFP SFF-8436 to SFF-8644 SAS Cable 3.3ft

SKU CH-N1WP-04BJ8

Connects QSFP+ (SFF-8436) to Mini SAS (SFF-8644) at 10 Gbps per channel over 3.3 ft of 30 AWG passive copper

  • TypeMini SAS
  • ColorSFF-8644 to QSFP(SFF8436)
  • Length3.3
  • Connector Number38
  • Connector DetailComponent
  • Terminal GenderMale-to-Male
  • Connects QSFP+ and SFF-8644 ports for SAS links
  • 10 Gbps per channel for high-throughput storage traffic
  • 3 ft passive copper cable with 30 AWG conductors
  • 100-ohm impedance and 38-pin connectors minimise pair-to-pair skew
  • Compliant with QSFP MSA and SAS 3.0 specifications

NetApp DS4243 DS4246 DS2246 compatibility

This cable connects NetApp DS4243, DS4246 and DS2246 storage shelves to host adapters using a QSFP+ (SFF-8436) to SFF-8644 interface. It suits administrators who need a direct copper link between those specific shelf models and compatible QSFP+ ports. The 3.3-foot length fits typical rack spacing without excess slack. It is not for buyers who need longer runs or different shelf connectors.

QSFP MSA and SAS3.0 compliance

The cable meets the QSFP Multi-Source Agreement and the SAS3.0 specification, ensuring interoperability with open-standard QSFP+ equipment from vendors such as Cisco, Ubiquiti, Netgear and others listed. Each channel supports up to 10 Gbps transfer rate with low power consumption because the assembly is passive copper. Precision process control minimises pair-to-pair skew for reliable signal integrity.

30AWG 100-ohm passive copper construction

The 30AWG conductors present a 100-ohm impedance across 38 pins in a male-to-male configuration. Passive design means no external power is required, reducing heat and failure points in the rack. The fixed 3.3-foot reach determines placement of the shelf relative to the host; longer distances would require an active or optical alternative not provided here.

Highlights

  • Connects QSFP+ and SFF-8644 ports for SAS links
  • 10 Gbps per channel for high-throughput storage traffic
  • 3 ft passive copper cable with 30 AWG conductors
  • 100-ohm impedance and 38-pin connectors minimise pair-to-pair skew
  • Compliant with QSFP MSA and SAS 3.0 specifications

Specifications

BrandH!Fiber.com
TypeMini SAS
ColorSFF-8644 to QSFP(SFF8436)
Length3.3
Connector Number38
Connector DetailComponent
Terminal GenderMale-to-Male
Speed10 gigabits_per_second
SpecificationsMini SAS
Shieldingcalculator
Featurescalculator

Questions about this item

Does the 30 AWG copper construction on the QSFP+ (SFF-8436) to SFF-8644 cable require any periodic replacement?

No, the passive 30 AWG copper cable has no active components or moving parts that wear out, so it does not need scheduled replacement under normal use.

What is the maximum sustained data rate per channel before the 100-ohm impedance limit is reached?

Each channel supports up to 10 Gbps, and the 100-ohm impedance is maintained across the full 3.3 ft length at that rate.

How much heat or noise does the passive copper cable generate when running at 10 Gbps all day?

The cable is completely passive with no power draw, so it produces zero noise and negligible heat even during continuous 10 Gbps operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.