Vszerda
Vszerda PWMHUB5 5 Port 4Pin PWM Fan Splitter Hub internal power cable
Expands one motherboard PWM header to five fans with a 1.3 ft cable and self-stick mount for tidy cable management
- Expands one motherboard header to five fans using PWM control
- 40 cm PWM extension cable with latch included for flexible routing
- Self-adhesive backing allows secure mounting and clean cable management
- 4-pin PWM fans synchronise speed through single motherboard signal
- 3-pin and 2-pin fans run at full speed when connected
PWM fan hub for multi-fan builds
This Vszerda PWMHUB5 expands a single motherboard 4-pin header into five 4-pin ports so up to five 12 V fans can run from one PWM signal. It is aimed at enthusiasts who want cleaner cable routing and centralised speed control for several case or radiator fans.
Check header type and RPM reporting
Verify your board supplies a standard 4-pin PWM header; the hub draws power from that header and passes one PWM control line to every port. Only the first red-marked connector feeds an RPM signal back to the motherboard, so fan-speed monitoring will reflect just that fan.
Sustained-load behaviour
Under continuous operation all four-pin fans spin at the identical PWM-driven speed while three-pin fans run at full voltage. The 40 cm (1.3 feet) extension cable and included self-adhesive pad keep the PCB secured and cables tidy during long sessions.
Highlights
- Expands one motherboard header to five fans using PWM control
- 40 cm PWM extension cable with latch included for flexible routing
- Self-adhesive backing allows secure mounting and clean cable management
- 4-pin PWM fans synchronise speed through single motherboard signal
- 3-pin and 2-pin fans run at full speed when connected
Specifications
No published specifications for this item yet.
Questions about this item
Does the PWMHUB5 include the extension cable and mounting adhesive or must they be purchased separately?
The hub ships with a 1.3 feet 4-pin PWM extension cable and self-stick pads for mounting the PCB, so nothing extra is required for basic installation.
Should I choose the 5-port hub or a different capacity for five 12 V PWM fans?
This model provides exactly five 4-pin outputs from a single motherboard header, matching a five-fan PWM setup; no other port-count versions are described in the data.
What does the 12 V rating mean when the hub is connected to a standard motherboard fan header?
The hub passes the motherboard's 12 V supply to all five ports, so each attached fan receives the same 12 V power the header delivers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115231BTC
In stock
