We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided PWM fan splitter cable with four 4-pin connectors, 10 inch length

Vszerda

Vszerda PWM Fan Splitter Cable 1 to 4 10 inch internal power cable

SKU CH-NYSJ-T7V1K

Splits one motherboard PWM header into four fan connections with 10 inch sleeved cables for tidy internal routing

  • Connects four fans to one motherboard header
  • PWM speed control shared across all connected fans
  • Single tachometer signal prevents RPM reading conflicts
  • Compatible with both 4-pin PWM and 3-pin fans
  • 10 inch sleeved cable simplifies internal cable routing

Vszerda PWM Fan Splitter Cable 1 to 4

This 10 inch internal power cable splits a single motherboard PWM header into four fan connections. It carries the PWM control signal to all attached fans so they run at the same speed. Only one connector passes the tachometer signal back to the board for accurate RPM monitoring. The braided sleeving helps keep cable routing tidy inside the case.

Builders needing one header to drive multiple fans

Suitable for anyone connecting up to four 4-pin or 3-pin fans to a single motherboard header with unified speed control. Not for users who require independent speed curves or individual RPM readings for each fan. Buyers needing longer reach between the header and fan locations should look at something else. Systems that rely on per-fan monitoring will not get that data from this splitter.

Single RPM signal on one connector

The splitter provides four outputs but only one full 4-pin connector returns a tachometer signal to the motherboard. All fans follow the same PWM duty cycle so speed control is identical across every connected device. This design prevents conflicting sense signals that could cause erratic RPM readings. Verify that your cooling plan accepts shared speed and a single reported RPM before installing.

Highlights

  • Connects four fans to one motherboard header
  • PWM speed control shared across all connected fans
  • Single tachometer signal prevents RPM reading conflicts
  • Compatible with both 4-pin PWM and 3-pin fans
  • 10 inch sleeved cable simplifies internal cable routing

Specifications

No published specifications for this item yet.

Questions about this item

Does the 10 inch Vszerda PWM splitter include four female fan headers and plug straight into a motherboard 4-pin header?

Yes, the cable provides one 4-pin motherboard plug and four female 4-pin connectors for fans; nothing else is required to connect up to four fans.

Should I choose this 10 inch splitter or a longer version for a mid-tower case?

The 10 inch length suits typical mid-tower runs from the CPU or rear fan header to nearby case fans; measure your routing path to confirm.

If only one fan reports RPM, will the other three still follow the motherboard PWM curve?

All four fans receive the same PWM signal so they spin at the same speed, but only the fan on the full 4-pin connector sends an RPM reading back to the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.