We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PWM fan splitter cable with one 4-pin and one 3-pin connector, 10.6 inch

Vszerda

Vszerda PWM fan splitter cable 1 to 2, 10.6 inch

SKU CH-Y5PS-VQ91M

Splits one 4-pin PWM header to two fans, one with RPM feedback, 10.6 inch length, 24AWG sleeved cable

  • Splits one motherboard header to run two fans
  • 4-pin connector passes RPM signal for synchronised speed control
  • 3-pin connector omits RPM pin for tandem fan operation
  • 24 AWG high-density sleeved cable built for long-term use
  • 6 inch length fits standard case fan placements

PWM fan splitter cable 1 to 2

The Vszerda PWM fan splitter cable divides one motherboard 4-pin header into two fan connectors. One branch carries a 4-pin connector that passes the RPM signal for synchronised speed control, while the other uses a 3-pin connector for tandem operation. The 10.6 inch length suits typical case-routing distances.

Check motherboard header and fan count

Verify that your motherboard has a free 4-pin PWM header rated for the combined current of both fans. The splitter sends a single PWM signal to both connectors, so both fans will follow the same speed curve. Ensure the 24AWG sleeved wiring can reach the intended fan positions without strain.

Suits builders adding a second case fan

This cable suits builders who want to run two fans from one header for increased airflow without occupying additional motherboard headers. It is not for setups that need independent speed profiles per fan, or for systems lacking a 4-pin PWM header altogether.

Highlights

  • Splits one motherboard header to run two fans
  • 4-pin connector passes RPM signal for synchronised speed control
  • 3-pin connector omits RPM pin for tandem fan operation
  • 24 AWG high-density sleeved cable built for long-term use
  • 6 inch length fits standard case fan placements

Specifications

No published specifications for this item yet.

Questions about this item

Does the 10.6 inch splitter include both fans or just the cable?

The package contains only the splitter cable; two case fans must be purchased separately.

Should I choose the 4 pin or 3 pin branch for my PWM fan?

Use the 4 pin branch for the fan that needs RPM reporting to the motherboard; the 3 pin branch runs the second fan at the same speed without reporting RPM.

What does the 24 AWG rating mean for the cable in my build?

24 AWG conductors handle typical case-fan currents without voltage drop over the 10.6 inch length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.