We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PWM 4-pin 1-to-4 fan splitter cable 10 inch

Vszerda

Vszerda PWM 4-Pin 1-to-4 Fan Splitter Cable 10 inch

SKU CH-EP4D-2X7C9

Connects four PWM fans to one motherboard header with 10 inch sleeved cables for shared speed control

Option 1 Pack

  • Splits one motherboard header to four PWM fans
  • 10 inch length suits compact case routing
  • Braided sleeve keeps cables tidy inside chassis
  • Single tachometer pin prevents RPM signal conflicts
  • All connected fans follow identical PWM speed curve

PWM 4-pin 1-to-4 fan splitter

This Vszerda PWM 4-pin 1-to-4 fan splitter cable connects four fans to a single motherboard header. It is suited for builders who need to expand cooling capacity without using extra fan headers. The cable supports PWM speed control so all attached fans follow the same signal. Only one 4-pin connector passes an RPM signal back to the board.

10 inch sleeved cable installs cleanly

The 10 inch length fits typical chassis routing and the black sleeved braid keeps wires tidy inside the case. Each male connector plugs directly into a 4-pin PWM or 3-pin fan header without adapters. Only the fan on the full 4-pin connector reports RPM; the other three lack tach pins to prevent signal conflicts. No extra software setup is required beyond normal fan-curve configuration.

Shared PWM signal under sustained load

Under continuous operation all four fans run at identical speeds dictated by the single PWM signal from the motherboard. The motherboard monitors RPM from only the primary fan, so speed readings reflect that unit alone. The other three fans track the same duty cycle without independent feedback. This arrangement keeps acoustic and thermal behaviour predictable during long workloads.

Highlights

  • Splits one motherboard header to four PWM fans
  • 10 inch length suits compact case routing
  • Braided sleeve keeps cables tidy inside chassis
  • Single tachometer pin prevents RPM signal conflicts
  • All connected fans follow identical PWM speed curve

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the splitter is controlling all four fans correctly after I plug it in?

Connect the fan with the full 4-pin connector to the header that carries the RPM wire, then use the motherboard software to confirm that fan reports speed while the other three follow the same PWM curve.

What comes in the box and is any extra cable or adapter required?

The package contains the single 1-to-4 PWM splitter cable; no additional cables or adapters are needed because each branch ends in a standard 4-pin fan plug that also accepts 3-pin fans.

The listing mentions only one 10 inch length — how do I decide if that reach is right for my build?

Measure the distance from your motherboard fan header to the farthest fan; if the path is 10 inches or less the cable will reach, otherwise you will need a longer splitter or an extension.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.