We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda PW-054-HX 8-pin EPS 90° angled adapter pair, internal power cable

SKU CH-4XFF-2NAZ1

Pair of 90-degree angled ATX 8-pin EPS adapters reroute CPU power cables in tight chassis

  • Color8P-8P for CPU 90 Degree
  • Connector Number8
  • Angled connectors fit CPU power ports in tight spaces
  • 90-degree up and down angles reroute cables from vertical to horizontal
  • Two adapters included: one up-angled, one down-angled
  • Designed for EPS 12 V CPU headers only, not PCIe graphics power
  • Solves clearance issues in low-profile chassis builds

Vszerda PW-054-HX EPS adapter pair

This pair of Vszerda PW-054-HX adapters converts an ATX 8-pin EPS male header to a 90-degree female socket for CPU 12V power. It is intended for builders who need to reroute the CPU power cable in tight spaces. The set includes one up-angled and one down-angled unit for flexible orientation. It does not work for PCIe graphics-card power connectors.

Installing the 90-degree EPS adapters

Installation is straightforward: plug the male end into the motherboard EPS header and attach the existing cable to the female side. The right-angle design lets the cable run horizontally instead of vertically, clearing low-profile coolers or cramped chassis roofs. Ensure the latch orientation matches your board layout; the up-angled and down-angled variants cover most routing needs. No tools are required beyond normal cable handling.

Capacity and headroom for CPU power

Each adapter carries the standard 12V EPS specification for CPU delivery. The pair comfortably handles typical desktop processor power demands through the 8-pin interface. Headroom is limited by the motherboard header and PSU cable rating, not the adapter itself. They are unsuitable for GPU auxiliary power or any non-EPS 12V application.

Highlights

  • Angled connectors fit CPU power ports in tight spaces
  • 90-degree up and down angles reroute cables from vertical to horizontal
  • Two adapters included: one up-angled, one down-angled
  • Designed for EPS 12 V CPU headers only, not PCIe graphics power
  • Solves clearance issues in low-profile chassis builds

Specifications

BrandVszerda
ModelPW-054-HX
Color8P-8P for CPU 90 Degree
Connector Number8

Questions about this item

How can I verify the 8-pin EPS adapter is seated correctly after installation?

Check that each 90-degree connector clicks firmly into the motherboard CPU 12V header and the PSU cable, with no visible gap, and that the system posts without a CPU power error.

What exactly is included in the package and what must I supply myself?

The pack contains two adapters — one Type-B up-angled and one Type-A down-angled — both 8-pin male to female; you provide the PSU EPS cable and motherboard.

Which of the two angled versions should I choose for a low-profile chassis?

Use the Type-B up-angled adapter when the cable must route upward, or the Type-A down-angled adapter when it must route downward, depending on clearance above the CPU socket.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.