We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black right-angled ATX 8-pin power adapters, one up one down

Vszerda

Vszerda PW-009 ATX 8-Pin 180° Angled Power Adapter 2-Pack

SKU CH-BW3E-VNZD8

Two 180-degree angled adapters reroute ATX 8-pin power cables from vertical to horizontal for low-clearance chassis

  • Connector Number4
  • Changes ATX 8-pin cable direction by 180° for tight builds
  • Converts vertical plug to horizontal routing in low-height cases
  • Includes one up-angled and one down-angled adapter in pack
  • Female-to-male design keeps original PSU cable fully compatible
  • Four connectors per adapter ensure secure power delivery to GPU

180° Angled ATX 8-Pin Adapters

This pair of Vszerda PW-009 adapters converts a standard ATX 8-pin power cable from a vertical to a horizontal orientation. Each pack contains one upward-angled and one downward-angled unit, giving builders the flexibility to route cables in tight spaces. The connectors change the installation direction by 180 degrees. They are designed for desktop graphics card power connections.

Ideal for Low-Profile Builds, Not for Standard Cases

These adapters suit builders working in limited-height chassis where a straight 8-pin plug would hit the side panel or interfere with other components. They solve clearance issues by letting the cable run parallel to the motherboard or GPU. Builders with standard ATX towers and generous clearance around the power socket will not need this change of direction. The product addresses a specific spatial constraint only.

Dual-Angle Pack Decides Fit

The single specification that determines suitability is the inclusion of both up-angled and down-angled connectors in the 2-pack. This combination lets you match the adapter to the exact vertical clearance above or below the socket on your graphics card or motherboard. Without both orientations, one adapter could point the cable into an obstruction. The paired design ensures one unit will fit the available 180-degree turn direction.

Highlights

  • Changes ATX 8-pin cable direction by 180° for tight builds
  • Converts vertical plug to horizontal routing in low-height cases
  • Includes one up-angled and one down-angled adapter in pack
  • Female-to-male design keeps original PSU cable fully compatible
  • Four connectors per adapter ensure secure power delivery to GPU

Specifications

BrandVszerda
ModelPW-009
Connector Number4

Questions about this item

What ATX connector standard does the PW-009 adapter use?

It uses the ATX 8-pin standard with a female socket on one end and a male plug on the other.

How much vertical clearance does the 180° bend need?

The right-angle design routes the cable horizontally so it fits in low-profile chassis where a straight plug would hit the side panel.

Which way do the up-angled and down-angled adapters face?

One adapter bends the cable upward and the other bends it downward; choose the orientation that points the cable toward the open space in your case.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.