We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular PoE splitter with USB-C and RJ45 ports, matte black finish

Vszerda

Vszerda PoE Splitter USB-C 5V 2.4A Gigabit Ethernet Adapter

SKU CH-0YBX-ZB7HX

Splits PoE into 5V 2.4A USB-C power and gigabit Ethernet for non-PoE devices up to 300 feet from the source

  • Powers USB-C devices over Ethernet using IEEE 802.3af PoE
  • Delivers 5V at up to 2.4A for Raspberry Pi 4 and cameras
  • Gigabit RJ45 passes data while splitting power from the line
  • Runs devices up to 300 feet from the PoE switch or injector
  • Requires an 802.3af compliant PoE source — no PD or QC fast charging support

PoE Splitter USB-C 5V 2.4A Gigabit Ethernet Adapter

This new Vszerda adapter separates an IEEE 802.3af PoE signal into a 5V USB-C power output rated at 2.4A and a gigabit RJ45 data connection. It enables non-PoE devices to receive both power and network connectivity through a single Ethernet cable run up to 300 feet from the source. A compliant PoE switch or injector and a PoE-carrying Ethernet cable are required to operate the splitter.

Ideal for Raspberry Pi 4 and fixed 5V USB-C devices

The splitter suits builders adding plug-and-play PoE support to Raspberry Pi 4 boards or other 5V USB-C equipment where a PoE HAT cannot be used. It reduces wall plugs and cable clutter in locations without nearby AC outlets. Buyers needing Power Delivery or Quick Charge fast-charging protocols should look elsewhere, as this unit does not support them. Devices drawing more than the 2.4A maximum will require a higher-power PoE solution.

Maximum output 2.4A at 5V via IEEE 802.3af

The single specification that determines compatibility is the 2.4A current limit imposed by the 802.3af standard. Verify that the target device operates within 5V and does not exceed this current draw before purchasing. An IEEE 802.3af compliant PoE switch or injector must serve as the power source equipment for the splitter to function.

Highlights

  • Powers USB-C devices over Ethernet using IEEE 802.3af PoE
  • Delivers 5V at up to 2.4A for Raspberry Pi 4 and cameras
  • Gigabit RJ45 passes data while splitting power from the line
  • Runs devices up to 300 feet from the PoE switch or injector
  • Requires an 802.3af compliant PoE source — no PD or QC fast charging support

Specifications

No published specifications for this item yet.

Questions about this item

Does the splitter generate noticeable heat when powering a Raspberry Pi 4 continuously?

The unit draws up to 2.4 A from an IEEE 802.3 af source, so it runs warm under full load but has no fan; ensure airflow around the case.

What PoE equipment must I already own to use this adapter?

An IEEE 802.3 af compliant PoE switch or injector plus a standard Ethernet cable carrying the PoE signal are required.

Can I keep my existing non-PoE switch and still use this splitter?

No — the splitter needs power delivered over the Ethernet cable, so the upstream switch or injector must be IEEE 802.3 af compliant.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.