Vszerda
Vszerda PCIe USB 3.0 Type-C card with 2.4A charging and 19-pin SATA power
Adds one USB 3.0 Type-C port, two internal USB 3.0 headers and a 2.4 A charge-only port powered by a SATA connector
- Adds a USB 3.0 Type-C port for 5Gbps external connectivity
- Two internal 20-pin headers give front-panel USB 3.0 expansion
- Dedicated charging port delivers up to 2.4A for fast device charging
- NEC UPD720201 controller supports USB 3.0, 2.0 and 1.1 standards
- Powered by a 15-pin SATA connector from the PSU
PCIe USB 3.0 Type-C card with 2.4A charging
This Vszerda add-in card adds one external USB 3.0 Type-C port and two internal 20-pin USB 3.0 headers to a desktop PC. It uses a PCI Express x1 slot and draws supplementary power from a 15-pin SATA connector. The NEC UPD720201 controller provides 5 Gbps bandwidth and is compatible with Windows XP through Windows 8 and Linux.
Upgrade from USB 2.0 headers
The jump is worth it when a case provides USB 3.0 front-panel connectors but the motherboard lacks matching 20-pin headers. It also adds a dedicated Type-C port for newer peripherals and a 2.4 A charge-only port for phones or tablets. The charge port requires the SATA power cable to be connected and does not transfer data.
Fits a PCIe x1, x4, x8
The card occupies one expansion bracket and leaves other slots open. Internal 20-pin headers connect to front-panel USB 3.0 bays or floppy-bay adapters. The external Type-C port is ready for flash drives or docks, while the charge-only port frees the data ports for storage devices.
Highlights
- Adds a USB 3.0 Type-C port for 5Gbps external connectivity
- Two internal 20-pin headers give front-panel USB 3.0 expansion
- Dedicated charging port delivers up to 2.4A for fast device charging
- NEC UPD720201 controller supports USB 3.0, 2.0 and 1.1 standards
- Powered by a 15-pin SATA connector from the PSU
Specifications
No published specifications for this item yet.
Questions about this item
What size PCIe slot does the Vszerda card require?
The card fits any PCIe 1x, 4x, 8x or 16x slot and uses a single lane.
Which power connector must be attached for the 2.4A charging port to work?
Connect the 15-pin SATA power cable from the PSU to the card's built-in SATA power connector; the charge port will not function without it.
When should the NEC UPD720201 driver be installed?
Install the driver from the included CD before first use on Windows XP, Vista, 7, 8 or 2003; Linux kernels typically include support already.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
WMtec 45 RPM vinyl record adapter silver aluminium 38mm 12mm 7.5mm
- Accessories
DELL 93XWF Intel Quick Assist Adapter 8970 100 Gbps 23W PCI-E 3.0 x16 Bracket
- Bracket



