We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black sleeved PCIe Y-splitter cables, 8-pin female to dual 6+2 male connectors

Vszerda

Vszerda PCIe Splitter 8 Pin to Dual 8 Pin (2 Pack) 24cm

SKU CH-2D5T-6WH6T

Adds two 8-pin PCIe power connectors from one PSU cable using 18AWG sleeved wire

  • TypeVGA
  • ColorBlack
  • Terminal GenderMale-to-Female
  • SpecificationsBlack
  • Disclaimer1 year warranty
  • Adds two GPU power connectors from one PSU port
  • 18AWG tin-coated copper handles heavy current draw
  • 24 cm length fits compact and full-size cases
  • Black sleeved cables keep builds tidy and organised
  • Works with 6-pin, 8-pin or dual GPU power sockets

Vszerda PCIe Splitter 8 Pin to Dual 8 Pin (2 Pack)

This splitter kit provides two Y-cables that convert a single PCIe 8-pin female connector into dual 8-pin (6+2) male connectors. It allows builders to power two graphics cards from one existing PSU cable. The 24 cm length suits compact routing inside small-form-factor cases.

Installation notes and common pitfalls

Each cable uses 18 AWG tin-coated copper conductors with woven sleeving for a secure fit. The 6+2 pin design mates with 6-pin, 8-pin or combined sockets on the GPU side. A frequent issue is exceeding the PSU rail's current rating when two high-draw cards share one source; verify the supply specification before connecting both branches.

Sustained-load behaviour

The 18 AWG gauge handles continuous current without excessive voltage drop across the 24 cm run. Woven sleeving resists abrasion and keeps conductors aligned during long gaming or compute sessions. The splitter itself adds no active regulation; stability depends entirely on the host power supply maintaining its rated output under load.

Highlights

  • Adds two GPU power connectors from one PSU port
  • 18AWG tin-coated copper handles heavy current draw
  • 24 cm length fits compact and full-size cases
  • Black sleeved cables keep builds tidy and organised
  • Works with 6-pin, 8-pin or dual GPU power sockets

Specifications

BrandJZYMOD
TypeVGA
ColorBlack
Terminal GenderMale-to-Female
SpecificationsBlack
Disclaimer1 year warranty

Questions about this item

How can I confirm the Vszerda PCIe splitter is delivering stable power to both graphics cards after installation?

Check that each 6+2 pin male connector seats firmly into the GPU sockets and that the system boots without power-related shutdowns or GPU throttling under load.

What comes in the 2-pack box and is a separate PSU cable required?

The box contains two 24 cm splitter cables and a user manual; you must supply an existing PCIe 8-pin cable from your ATX, SFX or fanless PSU.

Which connector version should I choose for a card with a single 8-pin socket versus one needing both 8-pin and 6-pin?

Each splitter provides two 8-pin (6+2) male ends, so one cable serves either a single 8-pin GPU or a dual-socket card using both connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.