We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda PCIe SATA 3.0 two-port card with heatsink and two cables

Vszerda

Vszerda PCIe SATA 3.0 2-port card with 2 cables

SKU CH-ZQQE-HQ1XV

Adds two 6 Gbit/s SATA ports via a PCIe 1x slot with JMicron JMB582 chipset, includes two cables and a low-profile bracket

  • Adds two SATA 3.0 ports with 6.0 Gbit/s transfer speed
  • Includes two SATA cables and a thin short bracket for immediate setup
  • JMicron JMB582 chip improves stability and supports AHCI 1.0 and IDE modes
  • Fits PCIe 1x through 16x slots for broad motherboard compatibility
  • Works with Windows XP to 10, Server 2003 and 2008, and Linux

Two-port SATA 6 Gbit/s expansion card

This PCIe 3.0 ×1 card adds two SATA 3.0 ports to a desktop system and includes two SATA cables and a low-profile bracket. It targets builders who need extra internal drive connections without occupying a larger slot. The JMicron JMB582 controller provides native AHCI and IDE support across Windows and Linux platforms.

Sustained 6 Gbit/s throughput with NCQ

The JMB582 chipset maintains Gen 3i signalling rates during extended transfers rather than throttling after a burst. Native Command Queuing reorders commands to keep the link saturated under mixed read and write workloads. A fitted heatsink dissipates controller heat so performance stays consistent during long backup or cloning sessions.

Single-lane PCIe 3.0 host interface

Bandwidth is capped by the single PCIe 3.0 lane, so the card cannot exceed roughly 8 Gbit/s aggregate host throughput even though each SATA port supports 6 Gbit/s. Builders needing more than two concurrent high-speed drives should consider a multi-lane HBA instead.

Highlights

  • Adds two SATA 3.0 ports with 6.0 Gbit/s transfer speed
  • Includes two SATA cables and a thin short bracket for immediate setup
  • JMicron JMB582 chip improves stability and supports AHCI 1.0 and IDE modes
  • Fits PCIe 1x through 16x slots for broad motherboard compatibility
  • Works with Windows XP to 10, Server 2003 and 2008, and Linux

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the JMB582 controller draw when the card runs all day?

The PCIe 1× slot supplies up to 10 W and the JMB582 chip typically stays well within that limit.

Which slot type and bracket does my chassis need for this card?

It fits any PCIe 1×, 4×, 8× or 16× slot and includes a thin short bracket for low-profile cases.

Will my older 1.5 Gbit/s SATA drives work at full speed on this card?

Yes — the controller negotiates 6.0, 3.0 and 1.5 Gbit/s automatically, so legacy drives run at their rated speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.